Mounting and accessory application
Orbiter’s unique Quick Lighting Mount (QLM) system allows the Orbiter Fresnel lens to be mounted safely and quickly. ARRI accessories like the 4 and 8-leaf barndoors can be added to the new Orbiter Fresnel lens to enable a perfect cut. Physical gels can also be used in addition to the more than 300 already pre-programmed gels available for Orbiter.
Learn more about working with the Orbiter Fresnel Lens
See the light, experience Orbiter in person
You can test an Orbiter Fresnel Lens at the following retailers in Europe, Asia or Australia.
ARRI accessories like the 4- (L2.40950.0) and 8-leaf (L2.40960.0) barndoors can be added to the new Orbiter Fresnel lens to enable a perfect cut. Physical gels can also be used in addition to the more than 300 already pre-programmed gels available for Orbiter.
The Orbiter Fresnel lens has a zoom range of 15 to 65°. Also, it is fully motorized and can be precisely positioned while being controlled locally via Orbiter’s Control Panel or remotely by DMX/RDM or IP based (ArtNet or sACN).
The Orbiter Fresnel lens will be available in black.
Use of the Fresnel Lens requires LiOS2.0.
No, the Fresnel Lens can be mounted and unmounted while the Orbiter is switched on.
If you would like to receive an offer or have a specific request regarding the Orbiter Fresnel Lens, fill in the form and we will get in touch with you.