SkyLink Receiver + Basestation - Front - Right - Hero - Table

SkyLink

The perfect wireless solution for ARRI SkyPanels is now available. Say goodbye to DMX cables with SkyLink. 

ARRI and Innovative Dimmers have teamed up to create SkyLink: a two-part system that allows for wireless DMX and RDM communication to SkyPanels and L-Series luminaires. The SkyLink Receiver and the SkyLink Base Station use LumenRadio for DMX/RDM communication and a WiFi chip in the Base Station allows for direct control from a DMX control application on a tablet or computer. Setting up a control network has never been easier. 

Wireless for all SkyPanels and L-Series luminaires

To work with SkyPanel models S30, S60 and S120 simply plug the SkyLink
Receiver (RX) directly into the DMX In-port on the back of the fixture and
the USB port below. The SkyPanel S360 already has Wireless DMX built in
and works seamlessly with the SkyLink products. For operation with L-Series
Fresnel lampheads external power supply devices are available or just use a powerbank.

WiFi to Wireless DMX

The real wireless magic happens in the SkyLink Base Station. Armed with two wireless chips, the SkyLink Base Station can communicate LumenRadio’s wireless DMX (CRMX) and the international standard of WiFi. Therefore, a tablet or computer can communicate, via WiFi, to the SkyLink Base Station which can, in turn, communicate the reliable CRMX standard to the SkyLink Receiver on the SkyPanel. This communication chain supports new and simple ways of controlling one or many SkyPanels and L-Series.

DMX + RDM = Total Control

ARRI LED products have always included an excellent implementation of RDM (Remote Device Management) in addition to the DMX protocols. RDM allows for two-way communication with the fixture and enables the ability to change all settings on the lamp head remotely. The SkyLink system is fully RDM capable and allows for complete control over all aspects of the SkyPanel and L-Series Fresnels.

Compact and Rugged Design

The SkyLink Receiver has a unique, compact, and robust design that fits perfectly within the SkyPanel family. The SkyLink is one of the smallest Wireless DMX receivers on the market and is designed specifically with the SkyPanel in mind. The swivel DMX connector allows for the SkyLink Receiver to be rotated 180º in order to achieve the best signal strength regardless of the SkyPanel’s or L-Series orientation.

Outstanding Range

The reliable Wireless DMX in SkyLink allows for strong and consistent communication to the fixtures. With an outstanding range of 150 m (500 ft.), SkyLink performs well on stage with typical obstructions. In optimal conditions, for example direct line-of-sight, the SkyLink can receive a signal up to 400 m (1300 ft.) away. This allows for dramatically increased freedom on set while still maintaining complete control over the SkyPanels and L-Series Fresnels.

Reset
25 Nov 2018
ARRI SkyLink - Data Sheet Sep2018
25 Nov 2018
ARRI SkyLink - Data Sheet Sept2018
25 Nov 2018
ARRI SkyLink - Data Sheet Sept2018
25 Nov 2018
ARRI SkyLink - Data Sheet Sep2018
25 Nov 2018
ARRI SkyLink - Data Sheet Sep2018
25 Nov 2018
ARRI SkyLink - Data Sheet Sept2018
25 Nov 2018
ARRI SkyLink - User Manual May2018
25 Nov 2018
SkyLink - Short Instructions Apr2018
25 Nov 2018
ARRI SkyLink - User Manual May2018
25 Nov 2018
ARRI SkyLink - User Manual May2018
25 Nov 2018
ARRI SkyLink - User Manual May2018
25 Nov 2018
ARRI SkyLink - User Manual May2018
25 Nov 2018
ARRI SkyLink - Flyer Sep2018
25 Nov 2018
ARRI SkyLink - CE-Certificate Apr2018