KK.0037692
The ARS Cube Set Pro combines the Accessory Rail Small ARS-1, ARS-2, ARS-3 and three Accessory Rail Cube ARC-1. It is a simple, quick and reliable way to attach and detach ...
KK.0037724
The ARS-3 Cube Set combines the Accessory Rail ARS-3 and the Accessory Rail Cube ARC-1. It is a simple, quick and reliable way to attach and detach accessories.
KK.0037723
The ARS-2 Cube Set combines the Accessory Rail ARS-2 and the Accessory Rail Cube ARC-1. It is a simple, quick and reliable way to attach and detach accessories.
KK.0037722
The ARS-1 Cube Set combines the Accessory Rail ARS-1 and the Accessory Rail Cube ARC-1. It is a simple, quick and reliable way to attach and detach accessories.
K2.0033852
The Accessory Rail Cube ARC-1 can be used on the SMB and LMB Accessory Adapter as well as on the Accessory Rails ARC-1, ARC-2 and ARC-3. It can be locked off by turning the...
K2.0034278
The ARS-3 shares the same rail interface as the SMB and the LMB Accessory Adapter. Two ball-pressure pieces on each side of the rail prevent an attached Accessory Rail Brac...
K2.0034009
The ARS-2 shares the same rail interface as the SMB and the LMB Accessory Adapter. Two ball-pressure pieces on each side of the rail prevent an attached Accessory Rail Brac...
K2.0016751
The Accessory Rail Small shares the same rail interface as the SMB and the LMB Accessory Adapter. Two ball-pressure pieces on each side of the rail prevent an attached Acce...
KK.0005807
The Rod Mounting Bracket RMB-2 can be attached to any ARRI 3/8-16 inch interface and holds a standard 19 mm rod (15 mm rod with a reduction insert).
K2.0006186
The RMB-3 supports a single 19 mm rod (15 mm rod via reduction insert K2.66255.0) and is well suited to accessories such as lens motors or lightweight viewfinder mounts.
KK.0020673
The Rod Mounting Bracket RMB-6 expands camera set-ups opportunities by offering strong support to rod-mounted camera accessories such as lens motors, image transmitters or ...
KK.0037732
K2.0020163
K2.0034309
The Rod Mounting Bracket RMB-8 is a compact design, 19mm rod mount with 3/8"-two pin interface (15mm rod via existing reduction insert K2.66255.0). The RMB-8 is equipped wi...
KK.0005809
The 15 mm reduction insert can be fitted to any 19 mm rod mount to allow compatibility with 15 mm rods.
KK.0005808
K2.65020.0
Articulated accessory holder arm for attaching accessories with 3/8-16 UNC mounting points to cameras with 3/8-16 mounting points. 120 mm / 4.7 inch long, with two swivel b...
K2.41100.0
Articulated accessory holder arm for attaching accessories with 3/8-16 inch mounting points to cameras with 3/8-16 inch mounting points. 240mm / 9.4 inch long, with two swi...
K2.66174.0
Converts a 3/8" anti twist pin interface into an ARRI standard rosette.
K2.65269.0
For attaching at the Cage System
K2.65268.0
The Rosette Adapter RA-3 adapts the existing handgrip K4.72172.0 and the HEB interface to the ARRI rosette style.
K2.0024563
The Rosette Adapter RA-5 adapts a 3/8" 2-pin interface to a 90° rotated rosette. Both pins can be unscrewed if necessary and stored in a parking position on the side of the...
K2.0024574
The Rosette Adapters allow the user to attach rosettes on four different positions on both side brackets. They will be attached by two screws and are rock solid. ARRI´s Mul...
K2.66189.0
The strong hinge locks via a rosette and mounts through a standard 3/8-16 inch interface with removable anti-rotation pins. The ARRI Rosette Based Hinge is not limited to t...
K2.66256.0
The Microphone Holder Bracket provides offset support for any standard microphone bracket fitted with a 3/8 inch thread. The Microphone Bracket Holder can be attached to an...
K2.52153.0
Bracket with 26 mm dovetail (insert side) interface on 15 mm rod, attaches to ARRIHEAD rosette, can be pivoted on rosette or slid along rod. For use with 26 mm shoe-mounted...
K2.52080.0
26mm dovetail insert. Both sides attach to 3/8-16 UNC thread mounting points having standard ARRI Ø 15,5mm counterbore for attaching and quickly removing accessories from ...
K2.52082.0
All purpose 26mm dovetail insert. Can be attached to 3/8 inch thread mounting points having standard ARRI Ø 15,5mm counterbore. For use with 26mm dovetail shoes.
K2.52083.0
All purpose 26mm dovetail shoe. Can be attached to 3/8 inch thread mounting points having standard ARRI Ø15,5mm counterbore. For use with 26mm dovetail inserts.
K2.54077.0
Attaches via 3/8 inch UNC thread with two locating pins for stability. For use with ARRI 18,65mm shoe-mounted accessories.
K2.65264.0
Can be mounted to several ARRI support accessories and offer optional front and rear or top mounted 15mm LWS rods.
K2.0001223
Offers compatibility with standard ENG shoulder belts.
K2.75005.0
Bracket to attach a on-camera microphone to the camera handle. Includes 3/8 inch and 1/4' knurled fasteners.
