L7-C Active Silver - right down barndoors_NEW

L7-C

Cut. Shape. Focus. Tune.

Color temperature, tint and hue can be continuously adjusted from 2,800 K to 10,000 K, between full plus or minus green and RGBW colors.

LIGHT ENGINE 2
L7-Cs with the new LE2 are 25 % brighter than previous L7-C versions.

STAND-MOUNT
versions include the following base configuration: 28 mm Spigot (Junior Pin), Inline Switch, Integrated 5-Pin DMX In and Thru.

HANGING
versions include the following base configuration: 28 mm Spigot (Junior Pin), 1,5 m (5 ft) Cable with Bare Ends, Integrated 5-Pin DMX In and Thru.

POLE-OPERATED
versions include the following base configuration: Pole Operation for Pan, Tilt and Focus, 28 mm Spigot (Junior Pin), 1,5 m (5 ft) Cable with Bare Ends, Integrated 5-Pin DMX In and Thru.

Innovative Features and rugged durability

Whereas other LED fixtures have taken forms that demand sacrifices in the quality of lighting designs, the L-Series is unique in that it fits perfectly into established working practices. This means that lighting designers will not have to adapt their creative techniques, nor will studios have to change their operating procedures; conventional Fresnels can be exchanged for L7 Fresnels on a like-for-like basis, achieving substantial and immediate cost savings with minimal disruption.

Cool Burning and Cost Saving

L-Series Fresnels burn cold; the lack of forward heat significantly reduces studio air conditioning costs and allows for a much cooler work environment. This makes life easier on set, both for the technicians behind the lights and the talent in front of them.

Focus Knobs

True Blue-style focus knobs provide the precise adjustment and rapid flood-to-spot that users enjoy from manual, mechanical control. Knobs on both sides of the fixture ensure easy access from all positions, eliminating the need for awkward reach-arounds. Focusing is neither tedious nor time-consuming; full flood-to-spot can be achieved in only three turns.
 

Sliding Stirrup

The ARRI sliding stirrup design enables precise adjustment of the fixture’s center of gravity, to compensate for front-end accessories. It also creates the option of pulling the fixture back and reducing its hanging height.

Yoke

With an extremely slim profile, the extruded aluminum yoke provides high strength without added weight. An optional pole-operated yoke allows full operation of pan, tilt and focus from the floor and is therefore a popular choice for many studios.
 

Tilt Lock

The high strength tilt lock provides extremely secure locking, eliminating movement and slippage and ensuring that the fixtures will stay where you put them.
 

Pole Operation

Optional pole operation is a popular choice for many broadcast studios, enabling fast and efficient adjustment of pan, tilt and focus without the need for ladders or lifts.

DMX Control

For broadcast studios, remote fixture control is of paramount importance, and all functions of the L7 are controllable through DMX. The L7 is also fully RDM compatible, providing bi-directional feedback and reporting of parameters including system status; hours on the light engine; and current DMX settings (with the ability to remotely assign and address all fixtures in a DMX network).

On-Board Control

For location applications, the ability to rapidly access all lamphead parameters directly at the light is important. For this reason, an optional on-board controller is available for the L7 Fresnels, with manual intensity adjustment and DMX settings.

With the L7-C, additional controls for color temperature and plus/minus green can be switched to manipulate hue and saturation at the touch of a button, and two fast-presets can be stored and recalled with ease.

Unique LED Lights with True Fresnel Performance

The ARRI L-Series has launched with an LED Fresnel fixture so close to its conventional equivalent in function and performance that it creates a previously unattainable opportunity: like-for-like replacement of traditional Fresnels with LED-based units.

Familiar, but Revolutionary

Quality of light begins with the field. Smooth intensity, uniform color, even illumination: all are traits shared by the L7 and conventional ARRI Fresnels. Since Fresnels are workhorses of the lighting industry, designers and technicians now have nothing new to learn in order to use LED technology.

Focusability: Spot > Flood > Anywhere In-Between

Versatility is the key element in traditional Fresnels, especially the ability to spot and flood the beam as needed. Whether it’s a flood field for a pullback shot or a tight spot for a bright highlight, the continuous focusability of the L7 performs just as expected.

Versatile and Controllable Beam

Shaping the beam to isolate talent and set elements. Cutting the field to eliminate spill light. Controllability is crucial to lighting, and the L7 provides the same ability as conventional Fresnels to cut and shape with barndoors and flags. The only part missing is the heat: the L7 features a completely cool light beam, keeping talent comfortable and air conditioning costs low.

Even Light Field

Clear, defined shadows have traditionally been a trait only of single source tungsten and daylight fixtures. ARRI L7 Fresnels provide the same single shadow properties designers expect, delivering natural results.

Color: Vibrant, Full-Spectrum Lighting

Flattering, true-to-life color rendition, previously achievable only with full-spectrum tungsten sources, is a hallmark feature of the L-Series. The fully tuneable white light of the L-Series Color versions can be adjusted for different skin tones, camera sensors and mixed-light environments, while specific color shades can be matched through full gamut color mixing. Unlike other LED fixtures, this level of color control does not involve compromising the quality of the light field: the L-Series Fresnels are unique in combining uniform light and single shadow rendition with absolute control of color attributes.

The simplest route to long-term energy savings

Running costs is where the similarity to tungsten Fresnels ends. L-Series fixtures reduce electricity usage, which equates to dramatic cost savings in terms of power draw. Further savings are brought about by the exceptional life span of the LED light engine, which lasts around 200 times longer than a conventional tungsten lamp; the reduced maintenance and minimized power distribution will combine with other cost-saving attributes such as built-in dimming to effect a rapid return on investment.

The L-Series also facilitates energy savings outside the studio, as versatile location lighting setups can be achieved with available power, meaning no large generators and no expensive fuel bills.

Upgradeable Technology for a Solid Investment

We all know the pace at which LED efficiency is improving, so the L-Series is an expansible platform designed to adapt with the latest enhancements in LED chip performance. 

The light engine is fully upgradeable, ensuring that the fixtures can take advantage of technology advances as and when they happen.

The firmware is also upgradeable through the USB port on the 
rear of each unit, accommodating future control protocols such as ACN and incorporating other system enhancements that may become available in due course.

Technical Data
Category
LED
Series
L-Series
Model
L7-C
Optical System
Focusable Fresnel
Light Aperture / Lens Diameter in mm
175 mm
Light Aperture / Lens Diameter in inch
7"
Beam Angle
15° to 50° Half Peak Angle
Weight in kg net*
Manual Version: approx. 8.2 kg
Pole Operated Version: approx. 10.0 kg
Weight in kg packed*
Manual Version: approx. 14 kg
Pole Operated Version: approx. 14 kg
Weight in lbs. net*
Manual Version: approx. 18.1 lbs
Pole Operated Version: approx. 22.1 lbs
Weight in lbs. Packed*
Manual Version: approx. 31 lbs
Pole Operated Version: approx. 31 lbs
Measurements (HxWxL) incl. Pin in mm*
Manual Version: 571 x 374 x 351 mm
Pole Operated Version: 582 x 357 x 351 mm
Measurements (HxWxL) excl. Pin in mm*
Manual Version: 438 x 374 x 351 mm
Pole Operated Version: 467 x 357 x 351 mm
Measurements (HxWxL) incl. Pin in inch*
Manual Version: 22.5 x 14.7 x 13.8"
Pole Operated Version: 22.9 x 14.0 x 13.8"
Measurements (HxWxL) excl. Pin in inch*
Manual Version: 17.2 x 14.7 x 13.8"
Pole Operated Version: 18.4 x 14.0 x 13.8"
Measurements (HxWxL) Packed size in mm*
540 x 500 x 380 mm
Measurements (HxWxL) Packed size in inch*
21.3 x 19.7 x 15.0"
Handling
Adjustable Sliding Stirrup, High-Strength Tilt Lock / Pole Operation Option (Pan, Tilt and Focus)
Mounting
28 mm Spigot (Junior Pin)
Tilt Angle
+/- 90°
Lamphead Voltage Input
100 - 240 V ~, 50 - 60 Hz
Power Consumption
220 W Maximum
Power Connection
powerCON TRUE1 (Bare Ends / Schuko / Edison)
Battery Connector
-
Battery DC Voltage Range
-
White Light
2,800 K to 10,000 K continuously variable correlated color temperature
Colored Light
Full RGB+W Color Gamut with Hue and Saturation Control
Color Temperature Tolerance
+/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)
Color Rendition
CRI Average > 94, TLCI Average > 90
Green-Magenta Adjustment
Continuously adjustable (Full Minusgreen to Full Plusgreen)
Dimming
0 to 100 % continuous
Control
5-Pin DMX In and Through, On-Board Controller, Mini-USB
Wireless Control
Not integrated, via SkyLink
Remote Device Management (RDM)
DMX Setup, Hour Counter and Standard RDM Commands
Software / Mini-USB Interface
DMX Setup, Fixture Status and Firmware Upgrade through PC
Housing Color
Blue/Silver, Black
Ambient Temperature Operation
-20 to +45° C (-4 to +113° F)
Protection Class / IP Rating
I / IP20
Estimated LED Lifetime (L70)
50,000 hours
Estimated Color Shift Over Lifetime (CCT)
+/- 5 %
Certifications
CE, UKCA, CB, ENEC, cNRTLus, FCC, PSE

Note *Weight and dimensions are rounded values.