KK.0044428
This set enables an artemis Gen.1 to be upgraded to ARTEMIS 2. NOTE To complete the initial order, at least one of the mandatory battery mounting, joystick, and monitor/...
K0.0044355
New and extremely flexible battery mounting system for ARTEMIS 2 and TRINITY 2. NOTE To complete the initial order, at least one of the mandatory battery mounting sets mus...
K0.0044356
K0.0044357
K2.0039443
24 V high-capacity camera power cable. Lemo 2B 7-pin to Lemo 2B 8-pin, 0.7 m/2.3' ALEXA 35, Mini, Mini LF, AMIRA For ARTEMIS 2 and TRINITY 2
K2.0039446
24 V high-capacity camera power cable. Lemo 2B 7-pin to Fischer 2-pin, 0.7 m/2.3' For ARTEMIS 2 and TRINITY 2
K2.0039447
12 V high-capacity camera power cable. Lemo 2B 7-pin to Lemo 2B 8-pin, 0.7 m/2.3' For ARTEMIS 2 and TRINITY 2
K2.0040329
12 V high-capacity camera power cable. Lemo 2B 7-pin to XLR 4-pin, 90° elbow, 0.7 m/2.3' For ARTEMIS 2 and TRINITY 2
K2.0039448
12 V high-capacity camera power cable. Lemo 2B 7-pin to XLR 4-pin, 0.7 m/2.3' For ARTEMIS 2 and TRINITY 2
K2.0039449
12 V high-capacity camera power cable. Lemo 2B 7-pin to Lemo 1B 6-pin, 0.7 m/2.3' For ARTEMIS 2 and TRINITY 2
K2.0039450
24 V high-capacity camera power cable. Lemo 2B 7-pin to Lemo 2B 4-pin, 0.7 m/2.3' For ARTEMIS 2 and TRINITY 2
K2.0039451
24 V high-capacity camera power cable. Lemo 2B 7-pin to XLR 4-pin, 0.7 m/2.3' For ARTEMIS 2 and TRINITY 2
K2.0044813
The DUB-2 is a connecting piece for cameras rigged for stabilizers such as artemis Gen.1 as well as Tiffen or GPi Pro stabilizers. The DUB-2 allows cameras to be swiftly mo...
K2.0039861
The Dovetail Utility Base DUB-1 allows camera rigs using ARRI CSS standard dovetails (QL-plates, SAM plates, Stabilizer Plate for CBP...) to mount to any “touch and Go 35” ...
K2.0041201
The Stabilizer Adapter Mount SAM-Zero is the standard camera plate for most ARRI Camera Stabilizer systems products. The 254mm (10”) plate will allow most camera featuring...
K2.0018851
The SAM-1 offers optical-centered mounting of ALEXA Classic, XT, SXT and LF cameras (not ALEXA Studio, ALEXA M or ALEXA 65) on the ARRI TRINITY and MAXIMA system. The SAM-1...
K2.0014215
The SAM-2 offers optical-centred mounting of ALEXA Mini cameras to the ARRI Trinity and MAXIMA systems. The SAM-2 is also compatible with third party stabilizer systems fit...
KK.0016116
Stabilizer Adapter Mount SAM-2 for ALEXA Mini with a rod mounting bracket and two single rods ⌀19mm designed to support lens motors driving Ultra primes and Master Prime le...
K2.0014630
The SAM-3 offers optical-centred mounting of AMIRA cameras to the ARRI Trinity and MAXIMA systems. The SAM-3 is also compatible with third party stabilizer systems fitted w...
K2.0033662
The Stabilizer Adapter Mount SAM-4 allows some non-ARRI cameras equipped with ARRI PCA to fit the range of stabilizer units from ARRI CSS.
KK.0016114
Stabilizer Adapter Mount SAM-3 for AMIRA with a rod mounting bracket and two single rods ⌀19mm designed to support lens motors driving Ultra primes and Master Prime lenses
K2.0039803
This Stabilizer Plate helps balance ALEXA Mini/Mini LF cameras on stabilizer systems with heavier prime lenses or shorter zooms that require support. A Balance Utility Dove...
K2.0038536
The Stabilizer Plate for CBP 450mm/18in is a long support plate designed to support ALEXA Mini/Mini LF and longer cinema optics, such as Signature Zooms, on ARRI CSS produc...
KK.0038971
The set is optimized for long lenses such as the Signature Zoom 65-300mm mounted to ALEXA Mini/Mini LF in ARRI CSS products. Included is a long Stabilizer Plate for CBP 45...
KK.0038972
The set is optimized for long lenses such as the Signature Zoom 65-300mm mounted to ALEXA Mini/Mini LF in ARRI CSS products. Included are a long Stabilizer Plate for CBP 4...
K2.0014981
Allows the Compact Bridge Plate to convert into a Stabilizer Adapter Mount for ALEXA Mini/ Mini LF (SAM-2). The Stabilizer Plate for Compact Bridge Plate is also compatible...
K2.0039089
The Compact Lens Support CLS-1 fits directly to the front groove of the Stabilizer Plate for CBP 450mm/18in and 355mm/14in to supports heavier prime lenses and smaller zoom...
K2.0038537
The Stabilizer System Bracket SSB-2 19mm studio is an adjustable rod console for CSS plates aimed at cameras rigged with long lenses and traditional studio lens supports e....
K2.0038618
The Stabilizer System Bracket SSB-2 15mm studio is an adjustable rod console for CSS plates aimed at cameras rigged with long lenses and traditional studio lens supports e....
K2.0040036
This baseplate fits to ALEXA Mini/Mini LF and is the common interface to the Compact Bridge Plate CBP-1/CBP-2 and Stabilizer Adapter Mount SAM-2. The BUD- 2 is available se...
K2.0044225
The compact and lightweight Stabilizer System Bracket SSB-4 can be mounted at the top of the ring of the TRINITY 2 on both sides. The SSB-4 allows the following brackets to...
KK.0033710
The set consists of two different counterweights. The larger counterweight weighs 300 g/0.66 lb, the two smaller counterweights weigh 150 g/0.33 lb each. The larger counter...
K2.0033569
Additional compact counterweight. Weight: 150 g/0.33 lb For TRINITY 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
K2.0043875
Additional compact counterweight. Weight: 50 g/0.110 lb For TRINITY 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
K2.0043876
Additional compact counterweight. Weight: 25 g/0.055 lb For TRINITY 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
K2.0042826
The 3/8" extension allows additional counterweights to be mounted on the TRINITY Pendulum Gen.2. Attaching counterweights to the side of the top and bottom stages TST-1, TS...
K2.0031236
The set includes the counterweight consisting of two half shells and two Delrin adapters for the 1.8" and 1.5" center posts. The Delrin adapters make it possible to mount t...
K2.0042837
Clamping bridge that can be clamped onto the rods of the battery hanger of TRINITY 2 as well as TRINITY Gen.1 and artemis Gen.1. For ARTEMIS 2, artemis Gen.1, TRINITY 2, ...
K2.0043811
19 mm carbon rod Length: 76 mm/3", Diameter: 19 mm For MGT-2 to place the monitor mount
K2.0040790
1 pair of 19 mm carbon rods Length: 120 mm/4.7", Diameter: 19 mm For TRINITY 2, ARTEMIS 2
K2.0041327
1 pair of 19 mm carbon rods Length: 305 mm/12", Diameter: 19 mm For TRINITY 2, ARTEMIS 2
K2.0040791
1 pair of 19 mm carbon rods Length: 430 mm/16.9", Diameter: 19 mm For TRINITY 2, ARTEMIS 2
K2.0016088
One pair Ø 19 mm, stainless steel, lightweight
K2.0016090
K2.66270.0
K2.66269.0
K2.0001022
One pair Ø 19 mm, stainless steel.
K2.72028.0
K2.0010433
Steel C-stand with detachable Turtle Base . Max. height 155 cm/61" NOTE To park the MAXIMA the Spider (K2.0010425) is needed For all ARTEMIS and TRINITY systems
K2.0041474
ARTEMIS carbon fiber telescopic center post, 1.8", no-tool clamp, torsion-free guided 1.5" inner post, fine-trim adjustment. Length from 37 cm/14.56" to 46.5 cm/18.3" For...
K2.0041976
Modular center post extension to extent the 1.8" ARTEMIS center post by 21.6 cm/8.5". Diameter: 1.8" Length: 21.6 cm/8.5" Lemo 3B 16-pin For ARTEMIS 2 and TRINITY 2
K2.0014264
Modular center post extension to extent the 1.8" ARTEMIS center post by 21.6 cm/8.5". Diameter: 1.8" Length: 21.6 cm/8.5" Lemo 3B 10-pin For artemis Gen.1 and TRINITY G...
KK.0041404
The new Super Post, 1.8" Gen.2 is a replacement center post for the standard center post which comes with the system. The new Super Post enables the camera in the ARTEMIS a...
K2.0010569
Extends the length of the bent gimbal handle by 35 mm/1.37" NOTE Do not combine two extensions. For ARTEMIS 1.8" gimbals
K2.0014280
The Knurled Handle Gimbal Extension adds a second knurled handle to the upper side of the 1.8" ARTEMIS gimbal, giving more control and better handling when the rig is used ...
K2.0037707
The Battery Mounting System Gen.2, contains two key components: The Battery Mounting Base BMS-1 for TRINITY Gen.1. and the two additional battery mounts, which are availabl...
K2.0040285
New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery bod...
K2.0040286
K2.0010470
12 V XLR high-capacity camera power cable, Lemo 1B 4-pin to XLR 4-pin, for video cameras, ARRIFLEX 16SR I, ARRI 16SR II, Aaton and other devices using a 4-pin XLR socket. L...
K2.0037771
High-capacity 12 V/24 V power cable to connect the Battery Hanger Module with the Top Stage or Bottom Stage Gen.2. Lemo 2B 7-pin to Lemo 2B 7-pin, 12 V/24 V For ARTEMIS 2...
K2.0038998
Power cable to power a Transvideo Starlight, or SmallHD 503 monitor from the Master Grip TRINITY 2. Lemo 0B 4-pin to Lemo 0B 2-pin, 24 V For MGT-1, MGT-2, TRINITY 2
K2.0038999
Power cable to power a ARRI Starlite monitor from the Master Grip TRINITY 2. Lemo 0B 4-pin to Lemo 0B 5-pin, 24 V For MGT-1, MGT-2, TRINITY 2
K2.0043861
Flexible joystick cable to connect Master Grip TRINITY with the TRINITY 2 head. Lemo 0B 4-pin to Lemo 0B 4-pin, 24 V, 75 cm/29.5" For TRINITY 2 only!
K2.0043975
Flexible joystick cable to connect the Master Grip TRINITY to the TRINITY 2 head when the rig is fully extended or when using a Super Post. Lemo 0B 4-pin to Lemo 0B 4-pin, ...
K2.0043884
Analog joystick cable to connect the analog TRINITY Gen.1 Joystick with TRINITY 2. Lemo 1B 8-pin to Lemo 0B 7-pin, no video, 12 V TRINITY 2 only!
K2.0042631
Flexible standard main cable to connect the outer ring of the TRINITY 2 to the inner ring. High-capacity 12 V/24 V, data, 1 x 12G video, LBUS, CAN Bus, tally Length: 0.65 m...
K2.0042681
Extra long flexible main cable to connect the outer ring of the TRINITY 2 to the inner ring. High-capacity 12 V/24 V, data, 1 x 12G video, LBUS, CAN Bus, tally Length: 0.75...
K2.0040332
Main cable for ARTEMIS 2 and TRINITY 2. High-capacity 12 V/24 V, data, 2 x 12G video, LBUS, CAN Bus, tally Lemo 3B 16-pin to Lemo 3B 16-pin For ARTEMIS 2 and TRINITY 2 ...
K2.0041161
Super Post main cable for ARTEMIS 2 and TRINITY 2. High-capacity 12 V/24 V, 2 x 12G video, LBUS, CAN Bus, tally Lemo 3B 16-pin to Lemo 3B 16-pin For ARTEMIS 2 and TRINITY...
K2.0043883
Power and data cable to connect the RCP-3 remote control to the TRINITY 2 system. Fischer 4-pin to Fischer 4-pin, 12 V Length: 25 cm/10" For TRINITY 2, RCP-3
K2.0001637
Cable RS 24V Fischer-type 3pin (male) to PWR IN/RS Fischer-type 3pin (female). Provides power and RUN/STOP function. Can be used to power a WVT-1, WVR-1 or UMC-4 from a cam...
KK.0020657
Equipped with two Gold-Mount battery mounts. Note: The KK set will come with a foam inserts which will fit into the SKB 3i-2317-14BE case. The SKB Case K2.0016275 is not ...
K2.0010466
Rain and dust protection for the lower sled and battery hanger assembly. For all ARTEMIS and TRINITY systems
K2.0041117
The TAB-1 helps stabilizing the camera rigs in some configurations with ARRI CSS. The TAB-1 links top-mounted 15mm LWS camera rods to the top of CSS products such as SRH-3 ...
K2.0020638
Designed by Mike Johnson in the US, the Top Point Kit adds stability to all stabilizer rigs requiring good resistance to vibrations and flex. The kit is not limited to ARRI...
K2.0015385
The Multi Support Plate MSP-1 for the TRINITY 2 and Gen.1 allows the use of the TRINITY head as a standalone, handheld, two-axis, fully stabilized gimbal. The MSP-1 include...
K2.0010426
With the CSS Euro mount, the MAXIMA equipped with the Spider (K2.0010425) can be attached to dollies and cranes, using the Euro mount. With the CSS Euro mount, the TRINITY ...
K2.0010427
With the CSS Mitchell mount, the MAXIMA equipped with the Spider (K2.0010425) can be attached to dollies and cranes, using the Euro mount. With the CSS Mitchell mount, the ...
K2.0010333
Highly adjustable and modular vest. Only extreme comfortable and modern fabrics are used for the artemis vest. Fits any operator with a height from 1.5m up to 2.1m / 4.9ft ...
KK.0020296
The artemis carbon spring arms offer a lightweight and optimized state of the art design. The absolutely friction-free ball bearings placed in the extreme stiff and torsion...
KK.0020297
KK.0020298
KK.0039452
The ARTEMIS carbon spring arms offer a lightweight and optimized, state-of-the-art design. The absolutely friction-free ball bearings placed in the extremely stiff and tors...
K2.0010500
Complete spring set made up of two spring sets, one for each arm segment. Capacity: 19 kg/41.8 lb For all ARTEMIS spring arms
K2.0010501
Complete spring set made up of two spring sets, one for each arm segment. Capacity: 23 kg/50.7 lb For all ARTEMIS spring arms
K2.0010502
Complete spring set made up of two spring sets, one for each arm segment. Capacity: 26 kg/57.3 lb For all ARTEMIS spring arms
K2.0037438
Complete spring set made off two spring sets, one for each arm segment. Capacity: 30kg/66.1Ib For all artemis spring arms
Motion beyond limits
Pure stability
![K2.0033662-SU-Stabilizer-Adapter-Mount-SAM-4[4]](/resource/responsive-image/206938/product-overlay/xs/1/k2-0033662-su-stabilizer-adapter-mount-sam-4-4-.jpg)
![K2.0038536-Stabilizer-Plate-For-CBP-450mm-18IN[1]](/resource/responsive-image/233730/product-overlay/xs/2/k2-0038536.jpg)
![K2.0038537-Stabilizer-System-Bracket-SSB-2-19mm[1]](/resource/responsive-image/233734/product-overlay/xs/2/k2-0038537.jpg)
