- Technical Data
Tuneable Daylight allows for fine-tuning of the daylight color temperature from 5,000 K to 6,500 K with increased brightness over the L5-C, and is particularly suited to applications requiring precise matching to daylight balanced light sources.
The L5 addition to the L-Series perfectly complements the L7, allowing for more mobile lighting and a wider range of power classes for television studios. Its compact size and low weight allow the L5 to be rigged in tight places and hung from low ceilings. The L5 is also ideal for cramped location shoots and interview setups. Low heat allows safer and more comfortable shooting conditions. This versatility and superb light quality make the L5 a highly anticipated addition to the award-winning L-Series family.
New features available on the L5 include a PowerCON power connector and an on-board battery input that permits industry-standard batteries to power the L5 without any sacrifice in terms of features or light output. The resulting increase in portability opens up whole new application areas, giving productions with the L5 the tremendous freedom to move and work fast.
The L5 is approximately 45 % brighter than a 300 W tungsten Fresnel, but only consumes 115 W. When compared to the L7, the L5 is half the weight and size.
versions include the following base configuration: 16 mm / 28 mm Combo Pin (Baby 5/8" / Junior 1-1/8" Combo Pin), Inline Switch, Integrated 5-Pin DMX In and Thru.
versions include the following base configuration: 16 mm / 28 mm Combo Pin (Baby 5/8" / Junior 1-1/8" Combo Pin), 1.5 m (5 ft) Cable with Bare Ends, Integrated 5-Pin DMX In and Thru.
versions include the following base configuration: Pole Operation for Pan, Tilt and Focus, 16 mm / 28 mm Combo Pin (Baby 5/8" / Junior 1-1/8" Combo Pin), 1.5 m (5 ft) Cable with Bare Ends, Integrated 5-Pin DMX In and Thru.
- Fully Tuneable from 5,000 K to 6,500 K
- Plus/Minusgreen correction
- More than 20 % brighter than L5-C at 5,600 K
- Perfect for TV studios switching to daylight color temperatures
- High Color Rendering
- Low Power Consumption (120 W Nominal)
- Fully Dimmable
- Lightweight and Compact
- True Fresnel Lens Light Characteristics
- On-Board Battery Connection (22 - 36V DC)
- Onboard DMX In and Out
- RDM Implementation
- USB Mini Connection for Firmware Updates
- Available in Blue/Silver and Black
- Fan Mode Selection
- powerCON TRUE1 Power Connector
L-Series L5-DT, Hanging, Blue/Silver, 1.5 m Cable, Bare Ends
L-Series L5-DT, Hanging, Black, 1.5 m Cable, Bare Ends
L-Series L5-DT, Pole Operated, Blue/Silver, 1.5 m Cable, Bare Ends
L-Series L5-DT, Pole Operated, Black, 1.5 m Cable, Bare Ends
L-Series L5-DT, Stand-Mount, Blue/Silver, 3 m Cable, Schuko Connector
L-Series L5-DT, Stand-Mount, Blue/Silver, 7 m Cable, Edison Connector
Innovative Features and rugged durability
Whereas other LED fixtures have taken forms that demand sacrifices in the quality of lighting designs, the L-Series is unique in that it fits perfectly into established working practices. This means that lighting designers will not have to adapt their creative techniques, nor will studios have to change their operating procedures; conventional Fresnels can be exchanged for L7 Fresnels on a like-for-like basis, achieving substantial and immediate cost savings with minimal disruption.
Cool Burning and Cost Saving
L-Series Fresnels burn cold; the lack of forward heat significantly reduces studio air conditioning costs and allows for a much cooler work environment. This makes life easier on set, both for the technicians behind the lights and the talent in front of them.
True Blue-style focus knobs provide the precise adjustment and rapid flood-to-spot that users enjoy from manual, mechanical control. Knobs on both sides of the fixture ensure easy access from all positions, eliminating the need for awkward reach-arounds. Focusing is neither tedious nor time-consuming; full flood-to-spot can be achieved in only three turns.
The ARRI sliding stirrup design enables precise adjustment of the fixture’s center of gravity, to compensate for front-end accessories. It also creates the option of pulling the fixture back and reducing its hanging height.
With an extremely slim profile, the extruded aluminum yoke provides high strength without added weight. An optional pole-operated yoke allows full operation of pan, tilt and focus from the floor and is therefore a popular choice for many studios.
The high strength tilt lock provides extremely secure locking, eliminating movement and slippage and ensuring that the fixtures will stay where you put them.
Optional pole operation is a popular choice for many broadcast studios, enabling fast and efficient adjustment of pan, tilt and focus without the need for ladders or lifts.
For broadcast studios, remote fixture control is of paramount importance, and all functions of the L7 are controllable through DMX. The L7 is also fully RDM compatible, providing bi-directional feedback and reporting of parameters including system status; hours on the light engine; and current DMX settings (with the ability to remotely assign and address all fixtures in a DMX network).
For location applications, the ability to rapidly access all lamphead parameters directly at the light is important. For this reason, an optional on-board controller is available for the L7 Fresnels, with manual intensity adjustment and DMX settings.
With the L7-C, additional controls for color temperature and plus/minus green can be switched to manipulate hue and saturation at the touch of a button, and two fast-presets can be stored and recalled with ease.
Unique LED Lights with True Fresnel Performance
The ARRI L-Series has launched with an LED Fresnel fixture so close to its conventional equivalent in function and performance that it creates a previously unattainable opportunity: like-for-like replacement of traditional Fresnels with LED-based units.
Familiar, but Revolutionary
Quality of light begins with the field. Smooth intensity, uniform color, even illumination: all are traits shared by the L7 and conventional ARRI Fresnels. Since Fresnels are workhorses of the lighting industry, designers and technicians now have nothing new to learn in order to use LED technology.
Spot > Flood > Anywhere In-Between
Versatility is the key element in traditional Fresnels, especially the ability to spot and flood the beam as needed. Whether it’s a flood field for a pullback shot or a tight spot for a bright highlight, the continuous focusability of the L7 performs just as expected.
Versatile and Controllable Beam
Shaping the beam to isolate talent and set elements. Cutting the field to eliminate spill light. Controllability is crucial to lighting, and the L7 provides the same ability as conventional Fresnels to cut and shape with barndoors and flags. The only part missing is the heat: the L7 features a completely cool light beam, keeping talent comfortable and air conditioning costs low.
Even Light Field
Clear, defined shadows have traditionally been a trait only of single source tungsten and daylight fixtures. ARRI L7 Fresnels provide the same single shadow properties designers expect, delivering natural results.
Color: Vibrant, Full-Spectrum Lighting
Flattering, true-to-life color rendition, previously achievable only with full-spectrum tungsten sources, is a hallmark feature of the L-Series.
The fully tuneable white light of the L-Series Color versions can be adjusted for different skin tones, camera sensors and mixed-light environments, while specific color shades can be matched through full gamut color mixing. Unlike other LED fixtures, this level of color control does not involve compromising the quality of the light field: the L-Series Fresnels are unique in combining uniform light and single shadow rendition with absolute control of color attributes.
The simplest route to long-term energy savings
Running costs is where the similarity to tungsten Fresnels ends. L-Series fixtures reduce electricity usage, which equates to dramatic cost savings in terms of power draw. Further savings are brought about by the exceptional life span of the LED light engine, which lasts around 200 times longer than a conventional tungsten lamp; the reduced maintenance and minimized power distribution will combine with other cost-saving attributes such as built-in dimming to effect a rapid return on investment.
The L-Series also facilitates energy savings outside the studio, as versatile location lighting setups can be achieved with available power, meaning no large generators and no expensive fuel bills.
Upgradeable Technology for a Solid Investment
We all know the pace at which LED efficiency is improving, so the L-Series is an expansible platform designed to adapt with the latest enhancements in LED chip performance.
The light engine is fully upgradeable, ensuring that the fixtures can take advantage of technology advances as and when they happen.
The firmware is also upgradeable through the USB port on the
rear of each unit, accommodating future control protocols such as ACN and incorporating other system enhancements that may become available in due course.
|L2.0001487||Mains cable, 7 m, powerCON TRUE1 / Edison, with line switch|
|L2.0001486||Mains cable, 3 m, powerCON TRUE1 / Schuko, with line switch|
|L2.0001485||Mains cable, 1.5 m, powerCON TRUE1 / bare ends|
|L2.0008904||Mains Cable, 3 m, powerCON TRUE1 / Japan, with line switch|
|L2.79470.0||4-leaf barndoor (168 mm / 6.6")|
|L2.79471.0||4-leaf barndoor, black/silver (168 mm / 6.6")|
|L2.79500.0||8-leaf barndoor (168 mm / 6.6")|
|L2.79480.0||Snoot (168 mm / 6.6")|
|L2.79490.0||Filter Frame (168 mm / 6.6")|
|L2.89068.0||Speed ring circular (9670) (168 mm / 6.6")|
|L2.70844.0||Chimera Lightbank Video Pro Plus "S", incl. 3 front screens (8125);
size: 24 x 32" / 60 x 80 cm; depth: 18" / 45 cm
|L2.76965.0||Compact ARRI Kit Stand LS.01 (050MKA)|
|L2.76976.0||Medium ARRI Kit Stand LS.2 (050A)|
|L2.88679.0||Wheel set with brakes, Ø 75 mm / 22 mm mount (110)|
|L2.40701.3||Spigot 28 mm, long, with flange & allen screw, fits profile stirrups without sleeve cuff|
|L2.76990.0||Safety cable (4 mm) 1 m, with Carabiner|
|Optical System||Focusable Fresnel|
|Lens Diameter||127 mm / 5"|
|Beam Angle||14° to 50° (Half Peak Angle)|
|Weight||Manual Version: approx. 5 kg / 11 lbs
Pole Op Version: approx. 7 kg / 15 lbs
|Size (H x W x L)|| Manual Version: 394 x 278 x 280 mm / 15.5 x 10.9 x 11"
Pole Op Version: 451 x 270 x 280 mm / 17.7 x 10.6 x 11"
|Packed Size (H x W x L)||470 x 400 x 410 mm / 18.5 x 15.8 x 16.1"|
|Handling||Adjustable Sliding Stirrup, High Strength Tilt Lock,
Pole Operation Option (Pan, Tilt and Focus)
|Mounting||16 mm / 28 mm Combo Pin (Baby 5/8" / Junior 1-1/8" Combo Pin)|
|Tilt Angle||+/- 90°|
|Power Supply Range||90 to 250 V AC, 50/60 Hz|
|Power Consumption||115 W Nominal|
|Power Connection||powerCON TRUE1 (Bare Ends / Schuko / Edison Cables Available)|
|Battery Connector||4-Pin XLR Connector (Pin 1: Negative / Pin 4: Positive)|
|Battery DC Voltage Range||23 to 36 V DC|
|White Light||5,000 K to 6,500 K Continuously Variable Correlated Color Temperature|
|Color Temperature Tolerance||+/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)|
|Color Rendition||CRI Average >93, TLCI Average >90|
|Green-Magenta Adjustment||Continuously Adjustable (Full Minusgreen to Full Plusgreen)|
|Dimming||0 to 100 % Continuous|
|Control||5-Pin DMX In and Through, On-Board Controller, Mini-USB|
|Remote Device Management (RDM)||DMX Setup, Hour Counter and Standard RDM Commands|
|Mini-USB Interface||DMX Setup, Fixture Status and Firmware Upgrade Through PC Software|
|Housing Color||Blue/Silver, Black|
|Ambient Temperature Operation||-20 to +45º C (-4 to +113º F)|
|Protection Class / IP Rating||I / IP20|
|Estimated LED Lifetime (L70)||50,000 hours|
|Estimated Color Shift Over Lifetime||+/- 5 %|
|Certifications||CE, CB, GS, cNRTLus, FCC, PSE|
|Note: All specifications are nominal / typical values.|
|10 Oct 2017||ARRI L5 - Datasheet (German)
Download (pdf, 650 KB)
|10 Oct 2017||ARRI L5 - Datasheet (English)
Download (pdf, 588 KB)
|06 Apr 2017||ARRI L5 - Datasheet (Portuguese)
Download (pdf, 611 KB)
|03 Apr 2017||ARRI L5 - Datasheet (Spanish)
Download (pdf, 617 KB)
|07 Aug 2017||ARRI L-Series - Short Instructions (English/German/French/Japanese)
Download (pdf, 742 KB)
|26 Jan 2017||ARRI L5 - User Manual (Japanese)
Download (pdf, 1.13 MB)
|24 Sep 2014||ARRI L5 - User Manual (English)
Download (pdf, 3.29 MB)
|24 Sep 2014||ARRI L5 - Bedienungsanleitung (German)
Download (pdf, 3.26 MB)
|04 Apr 2014||ARRI L-Series - Shortcuts (English/German)
Download (pdf, 42 KB)
|12 Nov 2013||ARRI Lampheads - General Safety Instructions (English/German)
Download (pdf, 110 KB)
ARRI Lighting Service Manager for ARRI LED Fixtures
|12 Apr 2015||ARRI Lighting Service Manager - V1.4 (Windows)
Old Firmware Version - Only Download if Prompted by FixtureDownload (zip, 3.94 MB)
|03 Mar 2016||ARRI L5 & L7 - Firmware 2.00.5
Download (zip, 224 KB)
|03 Mar 2016||ARRI L5 & L7 - Firmware Release Notes 2.00.5
Download (pdf, 196 KB)
|31 Mar 2015||ARRI L5-DT - Specification V1.2 (English)
Download (pdf, 112 KB)
|03 Mar 2015||ARRI L-Series - DMX Protocol V3.3
Download (pdf, 727 KB)
|13 May 2014||ARRI L5 - 2D and 3D CAD files
Download (zip, 2.89 MB)
|13 May 2014||ARRI L5 P.O. - 2D and 3D CAD files
Download (zip, 2.48 MB)
|04 Apr 2014||ARRI L5 - Dimensional Drawing
Download (pdf, 228 KB)
|04 Apr 2014||ARRI L5 P.O. - Dimensional Drawing
Download (pdf, 228 KB)
|01 Feb 2016||L5 Service Manual German/English
Download (pdf, 1.89 MB)
|28 Aug 2017||ARRI L-Series - CB-Certificate (English)
Download (pdf, 421 KB)
|15 Jun 2016||ARRI L-Series - CE Conformity (English/German)
Download (pdf, 39 KB)
|01 Jun 2016||ARRI L-Series - PSE Certificate (English/Japanese)
Download (pdf, 1.1 MB)
|30 Apr 2015||ARRI L-Series - GS Certificate (English/German)
Download (pdf, 1.06 MB)
|21 Apr 2015||ARRI L-Series - cNRTLus-Certificate (English)
Download (pdf, 554 KB)
|15 Sep 2017||ARRI L-Series - Brochure 2017
Download (pdf, 9.22 MB)