TRINITY Upgrades for Third Party Systems

Stabilizer Adapter Mount SAM-1 for ALEXA

K2.0018851

The SAM-1 offers optical-centered mounting of ALEXA Classic, XT, SXT and LF cameras (not ALEXA Studio, ALEXA M or ALEXA 65) on the ARRI Trinity and MAXIMA system. The SAM-1...

Stabilizer Adapter Mount SAM-2 for ALEXA Mini

K2.0014215

The SAM-2 offers optical-centred mounting of ALEXA Mini cameras to the ARRI Trinity and MAXIMA systems. The SAM-2 is also compatible with third party stabilizer systems fit...

Stabilizer Adapter Mount SAM-3 for AMIRA

K2.0014630

The SAM-3 offers optical-centred mounting of AMIRA cameras to the ARRI Trinity and MAXIMA systems. The SAM-3 is also compatible with third party stabilizer systems fitted w...

Stabilizer Adapter Mount SAM-4

K2.0033662

Short QL Plate Gen2 for SRH-3, TRINITY, MAXIMA

K2.0019295

Reinforced dovetail plate for SRH-3, TRINITY, MAXIMA

Long QL Plate Gen2 for SRH-3, TRINITY, MAXIMA

K2.0019294

Reinforced dovetail plate for SRH-3, TRINITY, MAXIMA

Extra long Plate 450mm for SRH-3, TRINITY, Maxima

K2.0033425

This extra long dovetail plate should be used when extra long lenses are mounted to the camera. Length: 450mm / 17.7 in. Note: The 450mm Quicklock Camera Plate can be used ...

SSB-1, Stabilizer System Bracket for TRINITY, MAXIMA

K2.0035956

Counterweight Set, 150 gr, 300 gr

KK.0033710

The set consists of two different counterweights: The larger counterweight weighs 300 gr / 0.66 lb, the two smaller counterweights weigh 150 gr / 0.33 lb each. The small co...

Counterweight Ring, Donut, 800 gr

K2.0031236

The set includes the counterweight consisting of two half shells and two Delrin adapters for the 1.8in and the 1.5 in center post. The Delrin adapters make it possible to ...

Bent Gimbal Handle Assembly for GPI

K2.0014786

Bent handle assembly for GPI Pro gimbals. Due the fact, that the GPI Pro gimbal handle it to short for the TRINITY application, it needs to be replaced by the this bent han...

Gimbal Handle Extender for 1.8in Gimbal

K2.0010569

Extents the length of the bent gimbal handle by 35mm/1,37in

Connector Protection Bracket for TRINITY

K2.0016402

This little add on bracket will add extra protection to the video sockets and the joystick main cable socket at the front panel of the TRINITY

TRINITY Battery Mount, Gold Mount

K2.0010288

Battery mount for Gold Mount batteries, with Lemo 1B 2pin plug

TRINITY Battery Mount, V-Mount

K2.0010289

Battery mount for V-Mount batteries, with Lemo 1B 2pin plug

C-Battery Bracket, pre assembled

K2.0010297

Plain bracket to mount transmitters, recorders or other accessories.

TRINITY Joystick Monitor Mount

K2.0010287

Thumb control for the tilt axes of the TRINITY. Including: K2.0014805, Joystick Main Cable K2.0014801, Monitor Power Cable, ARRI Starlight, 5pin K2.0014803, Monitor Power C...

artemis Docking Bracket, 1.8in

K2.0010319

Docking Bracket for all artemis systems using the 1.8in post and the wide docking ring ø2.5in

C-Stand with detachable Turtle Base

K2.0010433

Steel C-Stand with detachable Turtle Base

Top Stage Cine Broadcast

K2.0012159

By adding a second top stage to the top of the post the TRINITY can be converted into a regular artemis stabilizer, after the TRINITY head had been removed. The camera powe...

artemis Camera Dovetail Plate, 8in

K2.0010443

8in camera dovetail plate with three rows of holes and slots with an offset of 18mm. AC lightweight support can be mounted on both ends

Sled Cine Broadcast, Gold Mount

K2.0015659

To convert a TRINITY rig with Gold Mount battery mounts (K0.0012288) into a regular artemis stabilizer, the Sled Cine Broadcast will be needed.

Sled Cine Broadcast, V-Mount

K2.0015658

To convert a TRINITY rig with V-Mount battery mounts (K0.0012289) into a regular artemis stabilizer, the Sled Cine Broadcast will be needed.

artemis Monitor Bracket 6in incl. 1.5in Post Clamp

K2.0010321

artemis Monitor Bracket for the Transvideo 6in Cine HD monitors.

artemis Monitor Bracket 8in incl. 1.5in Post Clamp

K2.0010322

artemis Monitor Bracket for the Transvideo 8in Cine HD monitors

MSP-1, Multi Support Plate for TRINITY

K2.0015385

The Multi Support Plate MSP-1 for the TRINITY allows to use the TRINITY head as a standalone handheld two axis fully stabilized gimbal. The MSP-1 includes Rosettes which ...

Euro Mount for Spider

K2.0010426

Allows to use the MAXIMA QL mounted onto the Spider (K2.0010425) with dollies and cranes, which using Euro mount

Mitchell Mount for Spider

K2.0010427

Allows to use the MAXIMA QL mounted onto the Spider (K2.0010425) with dollies and cranes, which using Mitchell mount

Cam Power, Cine, 12V, XLR, HiCap

K2.0010470

12V XLR high capacity camera power cable, Lemo 1B 4pin to XLR 4pin, for video cameras, ARRI SR I, ARRI SR II, Aaton

Cam Power, Cine, 24V, Fischer 2pin

K2.0010471

24V camera power, Lemo 1S 3pin to Fischer 2pin, for ARRI SR III, LT, 435, 535

Cam Power, Cine, 24V, ALEXA Mini

K2.0020467

24V camera power cable, Lemo 1S 3pin to Lemo 2B 8pin, for ARRI ALEXA Mini & AMIRA

Cam Power, Cine, 12V, HiCap, ALEXA

K2.0010538

12V high capacity camera power cable, Lemo 1B 4pin to 2pin Fischer, for ARRI ALEXA

Cam Power, Cine, 12V, HiCap, ALEXA Mini

K2.0010540

12V high capacity camera power cable, Lemo 1B 4pin to Lemo 2B 8pin, for ARRI AMIRA & ALEXA Mini

Cam Power, Cine, 12V, HiCap, AMIRA, 90°

K2.0010565

12V high capacity 90° angled high capacity camera power cable, Lemo 1B 4pin to Lemo 2B 8pin, for ARRI AMIRA, ALEXA Mini

Cam Power, Cine, 12V, HiCap, Red EPIC

K2.0010472

12V high capacity camera power cable, Lemo 1B 4pin to Lemo 1B 6pin, for Red Epic

Cam Power, Cine & EFP, 12V, XLR

K2.0010469

12V XLR camera power cable, Lemo 1S 3pin to XLR 4pin, for video cameras, ARRI SR I, ARRI SR II, Aaton

TRINITY PWR GPI, Lemo 1S 3pin to 1B 4pin

K2.0010301

Cable to power the TRINITY system through the Top Stage from the Battery Hanger, Lemo 1S 3pin to 1B 4pin

TRINITY PWR GPI, Lemo 2B 3pin to 1B 4pin

K2.0010302

Cable to power the TRINITY system through the Top Stage from the Battery Hanger, Lemo 2B 3pin to 1B 4pin

TRINITY Power Cable, D-Tab to 1S 3pin

K2.0010296

External power cable to power the TRINITY head when it is used as a stand-alone Gimbal. Anton Bauer D-Tab to Lemo 1S 4pin

TRINITY Joystick Main Cable

K2.0014805

TRINITY Joystick Main Cable including the BNC-SMB Cable, Lemo 1B 8pin to Lemo 0B 7pin

Joystick Pwr. Cable for ARRI Strarlite

K2.0014801

Power and Data cable for the ARRI Starlight monitor mounted at the TRINITY Joystick Monitor Mount. Lemo 0B 5pin elbow to 0B 5pin

Joystick Pwr. Cable for Starlite

K2.0014803

12V power cable for the Transvideo Starlite monitor mounted at the TRINITY Joystick Monitor Mount. Lemo 0B 5pin elbow to 0B 2pin

TRINITY BNC Cable for Joystick Main Cable

K2.0014804

Spare BNC-SMB cable for the TRINITY Joystick Main Cable

HD SDI BNC Cable

K2.0010476

4.5 GHz HD SDI BNC to BNC cable, for camera and monitor

Monitor Power, 12V, Lemo 0B 2pin

K2.0010546

12V power cable, Lemo 0B 2pin to 12V XLR 4pin

Focus Power, 12V, Lemo 0S 4pin to RS

K2.0010548

12V power cable for receivers with an RS power in. Lemo 0S 4pin to 3pin Fischer (RS), for ARRI & C-Motion

Main Cable, 3B, 12V/24V, HiCap, 2 x HD SDI

K2.0010552

Main Cable with Lemo 3B, high capacity 12V/24V, 2 x HD SDI, 1 x SD, Tally

Main Cable, 2B, 12V/24V, HiCap, 1 x HD SDI

K2.0010481

Main Cable Lemo 2B, high capacity 12V/24V, 1 x HD SDI, 1 x SD, Tally

Post Tool for artemis and TRINITY

K2.0010461

Special tool to open the docking rings and to adjust the friction of the artemis 1.8in and 1.5in gimbals

Hex Key 4mm/5.32in

K2.0010434

Hex Key 6mm/1.4in

K2.0010435

Hex Key 1.5mm

K2.0010437

Hex Key 2mm

K2.0010436

3/8in-16 Camera Screw

K2.0037206

Pelican case for TRINITY & artemis rigs

K2.0016274

Empty Pelican 1615 Air case for the use of the foam insert which comes with the TRINITY Rig, the artemis Cine Broadcast and the artemis EFP HD

SKB case for TRINITY head

K2.0016275

Empty SKB case 3i-2317-14BE for the use of the foam insert which comes with the TRINITY head

artemis Rain Cover Lower Sled

K2.0010466

Rain and dust protection for the lower sled of the Cine Broadcast, EFP HD and the TRINITY battery hanger

Transvideo StarliteHD5-ARRI OLED Monitor

K2.0006960

5” OLED Monitor with touch functionality and integrated H.264 recorder (ARRI bus Interface / 3G / HD-SDI input + reclocked output / 5-44v DC power input through Lemo 0B 5pi...