The SAM-1 offers optical-centered mounting of ALEXA Classic, XT, SXT and LF cameras (not ALEXA Studio, ALEXA M or ALEXA 65) on the ARRI Trinity and MAXIMA system. The SAM-1...
Stabilizer Adapter Mount SAM-2 for ALEXA Mini with a rod mounting bracket and two single rods ⌀19mm designed to support lens motors driving Ultra primes and Master Prime le...
The SAM-2 offers optical-centred mounting of ALEXA Mini cameras to the ARRI Trinity and MAXIMA systems. The SAM-2 is also compatible with third party stabilizer systems fit...
The SAM-3 offers optical-centred mounting of AMIRA cameras to the ARRI Trinity and MAXIMA systems. The SAM-3 is also compatible with third party stabilizer systems fitted w...
Reinforced dovetail plate for SRH-3, TRINITY, MAXIMA
This extra long dovetail plate should be used when extra long lenses are mounted to the camera.
Length: 450mm / 17.7 in.
Note: The 450mm Quicklock Camera Plate can be used ...
The set consists of two different counterweights: The larger counterweight weighs 300 gr / 0.66 lb, the two smaller counterweights weigh 150 gr / 0.33 lb each.
The small co...
The set includes the counterweight consisting of two half shells
and two Delrin adapters for the 1.8in and the 1.5 in center post.
The Delrin adapters make it possible to ...
Modular center post extension to extent the 1.8in artemis center post by 8.5in/216mm. Lemo 3B connectors and internal main cable wiring
Modular center post extension to extent the 1.8in artemis center post by 8.5in/216mm. Lemo 2B connectors and internal main cable wiring
Extents the length of the bent gimbal handle by 35mm/1,37in
Knurled Handle Gimbal Extension adds a second knurled handle to the upper side of the 1.8in artemis Gimbal.
Knurled Handle Gimbal Extension gives more control and a better ...
This little add on bracket will add extra protection to the video sockets and the joystick main cable socket at the front panel of the TRINITY
Battery mount for Gold Mount batteries, with Lemo 1B 2pin plug
Battery mount for V-Mount batteries, with Lemo 1B 2pin plug
Plain bracket to mount transmitters, recorders or other accessories.
Thumb control for the tilt axes of the TRINITY.
K2.0014805, Joystick Main Cable
K2.0014801, Monitor Power Cable, ARRI Starlight, 5pin
K2.0014803, Monitor Power C...
Alternativ monitor mount for the use of the ARRI Starlite monitor with the TRINITY.
Alternativ monitor mount for the use of the SmallHD 5" monitor with the TRINITY.
Docking Bracket for all artemis systems using the 1.8in post and the wide docking ring ø2.5in
By adding a second top stage to the top of the post the TRINITY can be converted into a regular artemis stabilizer, after the TRINITY head had been removed. The camera powe...
Steel C-Stand with detachable Turtle Base
To convert a TRINITY rig with Gold Mount battery mounts (K0.0012288) into a regular artemis stabilizer, the Sled Cine Broadcast will be needed.
To convert a TRINITY rig with V-Mount battery mounts (K0.0012289) into a regular artemis stabilizer, the Sled Cine Broadcast will be needed.
artemis Monitor Bracket for the Transvideo 6in Cine HD monitors.
artemis Monitor Bracket for the Transvideo 8in Cine HD monitors
The Multi Support Plate MSP-1 for the TRINITY allows to use the TRINITY head as a standalone handheld two axis fully stabilized gimbal.
The MSP-1 includes Rosettes which ...
Allows to use the MAXIMA QL mounted onto the Spider (K2.0010425) with dollies and cranes, which using Euro mount
Allows to use the MAXIMA QL mounted onto the Spider (K2.0010425) with dollies and cranes, which using Mitchell mount
12V XLR high capacity camera power cable, Lemo 1B 4pin to XLR 4pin, for video cameras, ARRI SR I, ARRI SR II, Aaton
24V camera power, Lemo 1S 3pin to Fischer 2pin, for ARRI SR III, LT, 435, 535
24V camera power cable, Lemo 1S 3pin to Lemo 2B 8pin, for ARRI ALEXA Mini & AMIRA
12V high capacity camera power cable, Lemo 1B 4pin to 2pin Fischer, for ARRI ALEXA
12V high capacity camera power cable, Lemo 1B 4pin to Lemo 2B 8pin, for ARRI AMIRA & ALEXA Mini
12V high capacity 90° angled high capacity camera power cable, Lemo 1B 4pin to Lemo 2B 8pin, for ARRI AMIRA, ALEXA Mini
12V high capacity camera power cable, Lemo 1B 4pin to Lemo 1B 6pin, for Red Epic
12V XLR camera power cable, Lemo 1S 3pin to XLR 4pin, for video cameras, ARRI SR I, ARRI SR II, Aaton
Cable to power the TRINITY system through the Top Stage from the Battery Hanger, Lemo 1B 4pin to 1B 4pin
Cable to power the system through the Top Stage from the Battery Hanger, Lemo 1S 3pin to 1B 4pin
Cable to power the TRINITY system through the Top Stage from the Battery Hanger, Lemo 1B 4pin to 2B 8pin
Cable to power the TRINITY system through the Top Stage from the Battery Hanger.
External power cable to power the TRINITY head when it is used as a stand-alone Gimbal. Anton Bauer D-Tab to Lemo 1S 4pin
TRINITY Joystick Main Cable including the BNC-SMB Cable, Lemo 1B 8pin to Lemo 0B 7pin
Power and Data cable for the ARRI Starlight monitor mounted at the TRINITY Joystick Monitor Mount. Lemo 0B 5pin elbow to 0B 5pin
12V power cable for the Transvideo Starlite monitor mounted at the TRINITY Joystick Monitor Mount. Lemo 0B 5pin elbow to 0B 2pin
Spare BNC-SMB cable for the TRINITY Joystick Main Cable
4.5 GHz HD SDI BNC to BNC cable, for camera and monitor
12V power cable, Lemo 0B 2pin to 12V XLR 4pin
12V power cable for receivers with an RS power in. Lemo 0S 4pin to 3pin Fischer (RS), for ARRI & C-Motion
Main Cable with Lemo 3B, high capacity 12V/24V, 2 x HD SDI, 1 x SD, Tally
Main Cable Lemo 2B, high capacity 12V/24V, 1 x HD SDI, 1 x SD, Tally
Special tool to open the docking rings and to adjust the friction of the artemis 1.8in and 1.5in gimbals
Hex Key 4mm/5.32in
Hex Key 6mm/1.4in
Hex Key 1.5mm
Hex Key 2mm
Empty Pelican 1615 Air case for the use of the foam insert which comes with the TRINITY Rig, the artemis Cine Broadcast and the artemis EFP HD
Empty SKB case 3i-2317-14BE for the use of the foam insert which comes with the TRINITY head
Rain and dust protection for the lower sled of the Cine Broadcast, EFP HD and the TRINITY battery hanger
5” OLED Monitor with touch functionality and integrated H.264 recorder (ARRI bus Interface / 3G / HD-SDI input + reclocked output / 5-44v DC power input through Lemo 0B 5pi...