The SAM-1 offers optical-centered mounting of ALEXA Classic, XT, SXT and LF cameras (not ALEXA Studio, ALEXA M or ALEXA 65) on the ARRI Trinity and MAXIMA system. The SAM-1...
Stabilizer Adapter Mount SAM-2 for ALEXA Mini with a rod mounting bracket and two single rods ⌀19mm designed to support lens motors driving Ultra primes and Master Prime le...
The SAM-2 offers optical-centred mounting of ALEXA Mini cameras to the ARRI Trinity and MAXIMA systems. The SAM-2 is also compatible with third party stabilizer systems fit...
The SAM-3 offers optical-centred mounting of AMIRA cameras to the ARRI Trinity and MAXIMA systems. The SAM-3 is also compatible with third party stabilizer systems fitted w...
The Stabilizer Adapter Mount SAM-4 allows some non-ARRI cameras equipped with ARRI PCA to fit the range of stabilizer units from ARRI CSS.
Reinforced dovetail plate for SRH-3, TRINITY, MAXIMA
This extra long dovetail plate should be used when extra long lenses are mounted to the camera.
Length: 450mm / 17.7 in.
Note: The 450mm Quicklock Camera Plate can be used ...
This compact and lightweight Stabilizer System Bracket can be mounted at the top of the ring of the TRINITY or the MAXIMA.
The SSB-1 can be also mounted at the front and b...
The set consists of two different counterweights: The larger counterweight weighs 300 gr / 0.66 lb, the two smaller counterweights weigh 150 gr / 0.33 lb each.
The small co...
The set includes the counterweight consisting of two half shells
and two Delrin adapters for the 1.8in and the 1.5 in center post.
The Delrin adapters make it possible to ...
Modular center post extension to extent the 1.8in artemis center post by 8.5in/216mm. Lemo 3B connectors and internal main cable wiring.
Modular center post extension to extent the 1.8in artemis center post by 8.5in/216mm. Lemo 2B connectors and internal main cable wiring.
Extents the length of the bent gimbal handle by 35mm/1,37in.
Knurled Handle Gimbal Extension adds a second knurled handle to the upper side of the 1.8in artemis Gimbal.
Knurled Handle Gimbal Extension gives more control and a better ...
This little add-on bracket will add extra protection to the video sockets and the joystick main cable socket at the front panel of the TRINITY.
Battery mount for Gold Mount batteries, with Lemo 1B 2pin plug.
Battery mount for V-Mount batteries, with Lemo 1B 2pin plug.
Plain bracket to mount transmitters, recorders or other accessories.
Thumb control for the tilt axes of the TRINITY. Including: K2.0014805, Joystick Main Cable K2.0014801, Monitor Power Cable, ARRI Starlight, 5pin K2.0014803, Monitor Power C...
Alternativ monitor mount for the use of the ARRI Starlite monitor with the TRINITY.
Alternativ monitor mount for the use of the SmallHD 5" monitor with the TRINITY.
Docking Bracket for all artemis systems using the 1.8in post and the wide docking ring ø2.5in.
By adding a second top stage to the top of the post the TRINITY can be converted into a regular artemis stabilizer, after the TRINITY head had been removed. The camera powe...
To convert a TRINITY rig with Gold Mount battery mounts (K0.0012288) into a regular artemis stabilizer, the Sled Cine Broadcast will be needed.
To convert a TRINITY rig with V-Mount battery mounts (K0.0012289) into a regular artemis stabilizer, the Sled Cine Broadcast will be needed.
Steel C-Stand with detachable Turtle Base.
artemis Monitor Bracket for the Transvideo 6in Cine HD monitors.
artemis Monitor Bracket for the Transvideo 8in Cine HD monitors.
The Multi Support Plate MSP-1 for the TRINITY allows to use the TRINITY head as a standalone handheld two axis fully stabilized gimbal.
The MSP-1 includes Rosettes which ...
Allows to use the MAXIMA QL mounted onto the Spider (K2.0010425) with dollies and cranes, which using Euro mount.
Allows to use the MAXIMA QL mounted onto the Spider (K2.0010425) with dollies and cranes, which using Mitchell mount.