KK.0039359
The vibration isolator for the SRH remote head series combines excellent isolation from dynamic impulses, shocks, and vibrations in an extremely compact and rigid design. F...
KK.0041936
KK.0038971
The set is optimized for long lenses such as the Signature Zoom 65-300mm mounted to ALEXA Mini/Mini LF in ARRI CSS products. Included is a long Stabilizer Plate for CBP 45...
KK.0038972
The set is optimized for long lenses such as the Signature Zoom 65-300mm mounted to ALEXA Mini/Mini LF in ARRI CSS products. Included are a long Stabilizer Plate for CBP 4...
K2.0018851
The SAM-1 offers optical-centered mounting of ALEXA Classic, XT, SXT and LF cameras (not ALEXA Studio, ALEXA M or ALEXA 65) on the ARRI TRINITY and MAXIMA system. The SAM-1...
KK.0016116
Stabilizer Adapter Mount SAM-2 for ALEXA Mini with a rod mounting bracket and two single rods ⌀19mm designed to support lens motors driving Ultra primes and Master Prime le...
K2.0014215
The SAM-2 offers optical-centred mounting of ALEXA Mini cameras to the ARRI Trinity and MAXIMA systems. The SAM-2 is also compatible with third party stabilizer systems fit...
K2.0014630
The SAM-3 offers optical-centred mounting of AMIRA cameras to the ARRI Trinity and MAXIMA systems. The SAM-3 is also compatible with third party stabilizer systems fitted w...
K2.0033662
The Stabilizer Adapter Mount SAM-4 allows some non-ARRI cameras equipped with ARRI PCA to fit the range of stabilizer units from ARRI CSS.
K2.0038536
The Stabilizer Plate for CBP 450mm/18in is a long support plate designed to support ALEXA Mini/Mini LF and longer cinema optics, such as Signature Zooms, on ARRI CSS produc...
K2.0039803
This Stabilizer Plate helps balance ALEXA Mini/Mini LF cameras on stabilizer systems with heavier prime lenses or shorter zooms that require support. A Balance Utility Dove...
K2.0014981
Allows the Compact Bridge Plate to convert into a Stabilizer Adapter Mount for ALEXA Mini/ Mini LF (SAM-2). The Stabilizer Plate for Compact Bridge Plate is also compatible...
K2.0040036
This baseplate fits to ALEXA Mini/Mini LF and is the common interface to the Compact Bridge Plate CBP-1/CBP-2 and Stabilizer Adapter Mount SAM-2. The BUD- 2 is available se...
K2.0039089
The Compact Lens Support CLS-1 fits directly to the front groove of the Stabilizer Plate for CBP 450mm/18in and 355mm/14in to supports heavier prime lenses and smaller zoom...
K2.0019295
Reinforced dovetail plate using the SAM dovetail width. Length: 200 mm/7.87" Weight: 190 g/6.70 oz For TRINITY 2, ARTEMIS 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
K2.0019294
Reinforced dovetail plate using the SAM dovetail width. Length: 315 mm/12.4" Weight: 250 g/6.7 oz For TRINITY 2, ARTEMIS 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
K2.0033425
Reinforced dovetail plate using the SAM dovetail width. Length: 450 mm/17.7" Weight: 457 g/16 oz For TRINITY 2, ARTEMIS 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
K2.0040040
Extra heavy dovetail plate using the SAM dovetail width made of steel to achieve a better overall balance with top-heavy camera setups. Length 450 mm/17.72" Weight: 1.4 kg/...
K2.0040041
Extra heavy dovetail plate using the SAM dovetail width. Made of steel to achieve a better overall balance with top-heavy camera setups. Length: 315 mm/12.4" Weight: 0.94 ...
KK.0033710
The set consists of two different counterweights. The larger counterweight weighs 300 g/0.66 lb, the two smaller counterweights weigh 150 g/0.33 lb each. The larger counter...
K2.0019727
Small bracket which allows users to add additional brackets and mounts at the top center of the inner ring of the Stabilized Remote Head SRH-3 and SRH-360. For SRH-3 and S...
K2.0033426
Additional rod support bracket for the top of the SRH, which allows users to mount 15 mm rods. The rod support bracket can also be mounted to the front of the basic CSS dov...
K2.0019293
Adapter Plate to mount the SRH remote control panel on a tripod quick release plate. For SRH-3 and SRH-360.
K2.0019296
Cheese plate-like accessory mounting bracket which allows users to add additional accessories, like transmitters, to the right side of the SRH. For SRH-3 and SRH-360
K2.0019289
Small side feet, which can be attached laterally to the rosettes of the SRH remote control panel. For SRH-3 and SRH-360
K2.0010446
Receiver mount for ARRI, cmotion, Aladin, Fox and Preston focus receivers. For all artemis systems. NOTE Additional adapters are needed for ARRI and Cmotion (K2.0010447) a...
K2.0010447
Adapter to mount ARRI or cmotion focus receivers to the ARTEMIS Focus Bracket. For the use with the ARTEMIS Focus Bracket (K2.0010446)
K2.0010448
Focus bracket adapter to mount Preston MDR2 or MDR3 focus receivers onto the ARTEMIS Focus Bracket NOTE The ARTEMIS Focus Bracket (K2.0010446) is needed to use the Univers...
K2.0024658
The SRH Modular Low Mount Rack enables the SRH-stabilized remote control head to be positioned very low. The modular design also allows the use of the SRH-stabilized remote...
K2.0019298
Special Mitchell mount to mount the Stabilized Remote Head SRH-3 and SRH-360 into heads and dampers with restricted height clearance. The round base plate offers two mounti...
K2.0024106
To speed up the assembly of the SRH stabilized remote head to the BLACK ARM by Flowcine, a second SRH Castle Nut should already be permanently placed in the mount of the BL...
K2.0041922
To speed up the assembly of the stabilized remote head to the BLACK ARM by Flowcine, a second SRH castle nut should be permanently placed in the mount of the BLACK ARM. To ...
K2.0024108
Spare SRH Mitchell Mount Collar for the SRH stabilized remote head. Note: Metric thread
K2.0019291
Additional digital Focus control module for the SRH-3 remote control panel.
K2.0019292
Additional digital Zoom rocker module for the SRH-3 remote control panel.
K2.0019297
Longer SRH Mitchell mount collar for the Stabilized Remote Head SRH-3 and SRH-360. Very useful for special cranes. Length: 45 mm/1.77" NOTE Metric thread For SRH-3 and S...
K2.0033763
Spare rubber duck antenna For ERM-2400 (K2.0033763) and RF-2400 Radio Module 2400 MHz FHSS (KK.0039984)
K2.0033765
Spare rubber duck antenna For ERM-900 (K2.0033758) only!
K2.0037205
Specially cranked short right-angled Allen key For SRH-3 and SRH-360
K2.0037208
Spare tool for the SRH Mitchell mount castle nut (K2.0024106). Only for SRH-3 and SRH-360.
K2.0037206
![K2.0033662-SU-Stabilizer-Adapter-Mount-SAM-4[4]](/resource/responsive-image/206938/product-overlay/xs/1/k2-0033662-su-stabilizer-adapter-mount-sam-4-4-.jpg "K2.0033662-SU-Stabilizer-Adapter-Mount-SAM-4[4]")
![K2.0038536-Stabilizer-Plate-For-CBP-450mm-18IN[1]](/resource/responsive-image/233730/product-overlay/xs/2/k2-0038536.jpg "K2.0038536-Stabilizer-Plate-For-CBP-450mm-18IN[1]")
![K2.0019289[1]](/resource/responsive-image/80116/product-overlay/xs/1/k2-0019289-1-.jpg "K2.0019289[1]")
