The SAM-1 offers optical-centered mounting of ALEXA Classic, XT, SXT and LF cameras (not ALEXA Studio, ALEXA M or ALEXA 65) on the ARRI Trinity and MAXIMA system. The SAM-1...
The SAM-2 offers optical-centred mounting of ALEXA Mini cameras to the ARRI Trinity and MAXIMA systems. The SAM-2 is also compatible with third party stabilizer systems fit...
The SAM-3 offers optical-centred mounting of AMIRA cameras to the ARRI Trinity and MAXIMA systems. The SAM-3 is also compatible with third party stabilizer systems fitted w...
The Stabilizer Adapter Mount SAM-4 allows some non-ARRI cameras equipped with ARRI PCA to fit the range of stabilizer units from ARRI CSS.
Stabilizer Adapter Mount SAM-2 for ALEXA Mini with a rod mounting bracket and two single rods ⌀19mm designed to support lens motors driving Ultra primes and Master Prime le...
Stabilizer Adapter Mount SAM-3 for AMIRA with a rod mounting bracket and two single rods ⌀19mm designed to support lens motors driving Ultra primes and Master Prime lenses
Reinforced dovetail plate for SRH-3, TRINITY, MAXIMA
This extra long dovetail plate should be used when extra long lenses are mounted to the camera.
Length: 450mm / 17.7 in.
Note: The 450mm Quicklock Camera Plate can be used ...
The set consists of two different counterweights: The larger counterweight weighs 300 gr / 0.66 lb, the two smaller counterweights weigh 150 gr / 0.33 lb each.
The small co...
This compact and lightweight Stabilizer System Bracket can be mounted at the top of the ring of the TRINITY or the MAXIMA.
The SSB-1 can be also mounted at the front and b...
The SSB-3 bracket can be used to mount the Volt control box to the top stage of the artemis. Or can be used as a focus bracket which can be mounted at the artemis top stage...
Small Bracket which allows to add additional brackets and mounts at the top center of the inner ring of the SRH-3 stabilized remote head.
Additional Rod Support Bracket for the top of the SRH-3, which allows to mount 15mm rods.
The Rod Support Bracket can also be mounted to the front of the basic CSS dovetail...
Cheese plate like accessory mounting bracket which allows to add additional accessories, like transmitters to the right side of the SRH-3 stabilized remote head.
Adapter Plate to mount the SRH remote control panel on a tripod quick release plate.
For SRH-3 and SRH-360.
Small sides feet, which can be attached laterally to the rosettes of the SRH-3 remote control (K2.0016286)
The SRH Modular Low Mount Rack enables the SRH-stabilized remote control head to be positioned very low. The modular design also allows the use of the SRH-stabilized remote...
Longer threaded collar for the Mitchelll Mount for SRH-3 K2.0019298
Contact our technical service