K0.0013398
Three axes handheld camera stabilizer systems with a payload up to 30 kg/66 lb. The MAXIMA QL comes with a free positionable Joystick, a tool-free Quick Lock camera plate a...
K0.0013399
K2.0018851
The SAM-1 offers optical-centered mounting of ALEXA Classic, XT, SXT and LF cameras (not ALEXA Studio, ALEXA M or ALEXA 65) on the ARRI Trinity and MAXIMA system. The SAM-1...
KK.0016116
Stabilizer Adapter Mount SAM-2 for ALEXA Mini with a rod mounting bracket and two single rods ⌀19mm designed to support lens motors driving Ultra primes and Master Prime le...
K2.0014215
The SAM-2 offers optical-centred mounting of ALEXA Mini cameras to the ARRI Trinity and MAXIMA systems. The SAM-2 is also compatible with third party stabilizer systems fit...
K2.0014630
The SAM-3 offers optical-centred mounting of AMIRA cameras to the ARRI Trinity and MAXIMA systems. The SAM-3 is also compatible with third party stabilizer systems fitted w...
K2.0033662
The Stabilizer Adapter Mount SAM-4 allows some non-ARRI cameras equipped with ARRI PCA to fit the range of stabilizer units from ARRI CSS.
K2.0019295
Reinforced dovetail plate for SRH-3, TRINITY, MAXIMA
K2.0019294
K2.0033425
This extra long dovetail plate should be used when extra long lenses are mounted to the camera. Length: 450mm / 17.7 in. Note: The 450mm Quicklock Camera Plate can be used ...
KK.0033710
The set consists of two different counterweights: The larger counterweight weighs 300 gr / 0.66 lb, the two smaller counterweights weigh 150 gr / 0.33 lb each. The small co...
K2.0035956
This compact and lightweight Stabilizer System Bracket can be mounted at the top of the ring of the TRINITY or the MAXIMA. The SSB-1 can be also mounted at the front and b...
K2.0010426
Allows to use the MAXIMA QL mounted onto the Spider (K2.0010425) with dollies and cranes, which using Euro mount.
K2.0010427
Allows to use the MAXIMA QL mounted onto the Spider (K2.0010425) with dollies and cranes, which using Mitchell mount.
K0.0010629
K0.0012302
K2.0014908
Clamp bracket to lock the pan axis of the MAXIMA QL
K2.0014909
Additional cheese plate with 3/8in threads, which can be mounted to the right side at the top of the MAXIMA QL
K2.0010336
Top Holder to mount the MAXIMA QL on cranes, Jib arms and rigs.
K2.0010425
Mounting Bracket to use the MAXIMA QL with Spring Arms using the standard 5/8in arm post. With the optional Euro and Mitchell mounts, the Spider can be used on dollies and ...
K2.0014995
Spare cone for the Spider K2.0010425 used with the MAXIMA QL
K2.0010424
Spare mini joystick control for Tilt and Pan, which can be mounted at the frame of the MAXIMA right above the rubber handle
K2.0010337
Bidirectional 2,4 GHz diversity wireless control for Tilt, Pan and Roll
K2.0010470
12V XLR high capacity camera power cable, Lemo 1B 4pin to XLR 4pin, for video cameras, ARRI SR I, ARRI SR II, Aaton.
K2.0010538
12V high capacity camera power cable, Lemo 1B 4pin to 2pin Fischer, for ARRI ALEXA.
K2.0010540
12V high capacity camera power cable, Lemo 1B 4pin to Lemo 2B 8pin, for ARRI AMIRA & ALEXA Mini.
K2.0010565
12V high capacity 90° angled high capacity camera power cable, Lemo 1B 4pin to Lemo 2B 8pin, for ARRI AMIRA, ALEXA Mini.
K2.0010472
12V high capacity camera power cable, Lemo 1B 4pin to Lemo 1B 6pin, for Red Epic.
K2.0010476
4.5 GHz HD SDI BNC to BNC cable, for camera and monitor.
K2.0010434
K2.0037206
K2.0010529
Hard case went foam insert for Maxima QL and additional accessories
K2.0006960
5” OLED Monitor with touch functionality and integrated H.264 recorder (ARRI bus Interface / 3G / HD-SDI input + reclocked output / 5-44v DC power input through Lemo 0B 5pi...
![K2.0033662-SU-Stabilizer-Adapter-Mount-SAM-4[4]](/resource/responsive-image/206938/product-overlay/xs/1/k2-0033662-su-stabilizer-adapter-mount-sam-4-4-.jpg)
