The SAM-1 offers optical-centered mounting of ALEXA Classic, XT, SXT and LF cameras (not ALEXA Studio, ALEXA M or ALEXA 65) on the ARRI TRINITY and MAXIMA system. The SAM-1...
Stabilizer Adapter Mount SAM-2 for ALEXA Mini with a rod mounting bracket and two single rods ⌀19mm designed to support lens motors driving Ultra primes and Master Prime le...
The SAM-2 offers optical-centred mounting of ALEXA Mini cameras to the ARRI Trinity and MAXIMA systems. The SAM-2 is also compatible with third party stabilizer systems fit...
The SAM-3 offers optical-centred mounting of AMIRA cameras to the ARRI Trinity and MAXIMA systems. The SAM-3 is also compatible with third party stabilizer systems fitted w...
The Stabilizer Adapter Mount SAM-4 allows some non-ARRI cameras equipped with ARRI PCA to fit the range of stabilizer units from ARRI CSS.
Reinforced dovetail plate for SRH-3, TRINITY, MAXIMA
This extra long dovetail plate should be used when extra long lenses are mounted to the camera.
Length: 450mm / 17.7 in.
Note: The 450mm Quicklock Camera Plate can be used ...
The set consists of two different counterweights: The larger counterweight weighs 300 gr / 0.66 lb, the two smaller counterweights weigh 150 gr / 0.33 lb each.
The small co...
This compact and lightweight Stabilizer System Bracket can be mounted at the top of the ring of the TRINITY or the MAXIMA.
The SSB-1 can be also mounted at the front and b...
Allows to use the MAXIMA QL mounted onto the Spider (K2.0010425) with dollies and cranes, which using Euro mount.
Allows to use the MAXIMA QL mounted onto the Spider (K2.0010425) with dollies and cranes, which using Mitchell mount.
Clamp bracket to lock the pan axis of the MAXIMA QL
Additional cheese plate with 3/8in threads, which can be mounted to the right side at the top of the MAXIMA QL
Top Holder to mount the MAXIMA QL on cranes, Jib arms and rigs.
Mounting Bracket to use the MAXIMA QL with Spring Arms using the standard 5/8in arm post. With the optional Euro and Mitchell mounts, the Spider can be used on dollies and ...
Spare cone for the Spider K2.0010425 used with the MAXIMA QL
Spare mini joystick control for Tilt and Pan, which can be mounted at the frame of the MAXIMA right above the rubber handle
Bidirectional 2,4 GHz diversity wireless control for Tilt, Pan and Roll
Arm post with ø5/8in/15.8mm and a length of 10in/254 mm
Arm post with ø5/8in/15.8mm and a length of 12in/300mm
Spare arm post clamp ring
Highly adjustable and modular vest. Only extreme comfortable and modern fabrics are used for the artemis vest. Fits any operator with a height from 1.5m up to 2.1m / 4.9ft ...
The artemis carbon spring arms offer a lightweight and optimized state of the art design. The absolutely friction-free ball bearings placed in the extreme stiff and torsion...