KK.0038971
The set is optimized for long lenses such as the Signature Zoom 65-300mm mounted to ALEXA Mini/Mini LF in ARRI CSS products. Included is a long Stabilizer Plate for CBP 45...
KK.0038972
The set is optimized for long lenses such as the Signature Zoom 65-300mm mounted to ALEXA Mini/Mini LF in ARRI CSS products. Included are a long Stabilizer Plate for CBP 4...
K2.0018851
The SAM-1 offers optical-centered mounting of ALEXA Classic, XT, SXT and LF cameras (not ALEXA Studio, ALEXA M or ALEXA 65) on the ARRI TRINITY and MAXIMA system. The SAM-1...
KK.0016116
Stabilizer Adapter Mount SAM-2 for ALEXA Mini with a rod mounting bracket and two single rods ⌀19mm designed to support lens motors driving Ultra primes and Master Prime le...
K2.0014215
The SAM-2 offers optical-centred mounting of ALEXA Mini cameras to the ARRI Trinity and MAXIMA systems. The SAM-2 is also compatible with third party stabilizer systems fit...
K2.0014630
The SAM-3 offers optical-centred mounting of AMIRA cameras to the ARRI Trinity and MAXIMA systems. The SAM-3 is also compatible with third party stabilizer systems fitted w...
K2.0033662
The Stabilizer Adapter Mount SAM-4 allows some non-ARRI cameras equipped with ARRI PCA to fit the range of stabilizer units from ARRI CSS.
K2.0038536
The Stabilizer Plate for CBP 450mm/18in is a long support plate designed to support ALEXA Mini/Mini LF and longer cinema optics, such as Signature Zooms, on ARRI CSS produc...
K2.0039803
This Stabilizer Plate helps balance ALEXA Mini/Mini LF cameras on stabilizer systems with heavier prime lenses or shorter zooms that require support. A Balance Utility Dove...
K2.0014981
Allows the Compact Bridge Plate to convert into a Stabilizer Adapter Mount for ALEXA Mini/ Mini LF (SAM-2). The Stabilizer Plate for Compact Bridge Plate is also compatible...
K2.0040036
This baseplate fits to ALEXA Mini/Mini LF and is the common interface to the Compact Bridge Plate CBP-1/CBP-2 and Stabilizer Adapter Mount SAM-2. The BUD- 2 is available se...
K2.0039089
The Compact Lens Support CLS-1 fits directly to the front groove of the Stabilizer Plate for CBP 450mm/18in and 355mm/14in to supports heavier prime lenses and smaller zoom...
K2.0019295
Reinforced dovetail plate using the SAM dovetail width. Length: 200 mm/7.87" Weight: 190 g/6.70 oz For TRINITY 2, ARTEMIS 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
K2.0019294
Reinforced dovetail plate using the SAM dovetail width. Length: 315 mm/12.4" Weight: 250 g/6.7 oz For TRINITY 2, ARTEMIS 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
K2.0033425
Reinforced dovetail plate using the SAM dovetail width. Length: 450 mm/17.7" Weight: 457 g/16 oz For TRINITY 2, ARTEMIS 2, TRINITY Gen.1, SRH-3, SRH-360, MAXIMA
K2.0035956
This compact and lightweight Stabilizer System Bracket can be mounted at the top of the ring of the TRINITY or the MAXIMA. The SSB-1 can be also mounted at the front and b...
KK.0033710
The set consists of two different counterweights. The larger counterweight weighs 300 g/0.66 lb, the two smaller counterweights weigh 150 g/0.33 lb each. The larger counter...
K2.0031236
The set includes the counterweight consisting of two half shells and two Delrin adapters for the 1.8" and 1.5" center posts. The Delrin adapters make it possible to mount t...
K2.0014264
Modular center post extension to extent the 1.8" ARTEMIS center post by 21.6 cm/8.5". Diameter: 1.8" Length: 21.6 cm/8.5" Lemo 3B 10-pin For artemis Gen.1 and TRINITY G...
K2.0019260
Modular center post extension to extent the 1.8in artemis center post by 8.5in/216mm. Lemo 2B connectors and internal main cable wiring.
K2.0014786
Bent handle assembly for GPI Pro gimbals. Due to the fact that the GPI Pro gimbal handle is too short for the TRINITY application, it needs to be replaced by this bent hand...
K2.0010569
Extends the length of the bent gimbal handle by 35 mm/1.37" NOTE Do not combine two extensions. For ARTEMIS 1.8" gimbals
K2.0014280
The Knurled Handle Gimbal Extension adds a second knurled handle to the upper side of the 1.8" ARTEMIS gimbal, giving more control and better handling when the rig is used ...
K2.0016402
This little add-on bracket will add extra protection to the video sockets and the joystick main cable socket at the front panel of the TRINITY.
K2.0010288
Battery mount for Gold Mount batteries, with Lemo 1B 2pin plug.
K2.0010289
Battery mount for V-Mount batteries, with Lemo 1B 2pin plug.
K2.0010297
Plain bracket to mount transmitters, recorders or other accessories.
K2.0010287
Analog joystick thumb control for the tilt axis of the TRINITY Gen.1. Including: K2.0014805, Joystick Main Cable K2.0014801, Monitor Power Cable, ARRI Starlight, 5-pin K2....
K0.0019496
Alternative monitor mount for the use of the ARRI Starlite monitor with the TRINITY. For TRINITY Gen.1 Joystick Monitor Mount
K0.0019500
Alternative monitor mount for the use of the SmallHD 5" monitor with the TRINITY. For TRINITY Gen.1 Joystick Monitor Mount
K2.0010319
Docking bracket for all ARTEMIS systems using the 1.8" post and the wide docking ring 2.5". Fits C-stands and Low-Boys with a 5/8"/15.8 mm spigot. For ARTEMIS 2, artemis G...
K2.0012159
By adding a second top stage to the top of the post the TRINITY can be converted into a regular artemis stabilizer, after the TRINITY head had been removed. The camera powe...
K2.0010443
8" camera dovetail plate with three rows of holes and slots with an offset of 18 mm. AC lightweight support can be mounted on both ends. Length: 20.3 cm/ 8" Weight: 190 g/...
K2.0015659
To convert a TRINITY rig with Gold Mount battery mounts (K0.0012288) into a regular artemis stabilizer, the Sled Cine Broadcast will be needed.
K2.0015658
To convert a TRINITY rig with V-Mount battery mounts (K0.0012289) into a regular artemis stabilizer, the Sled Cine Broadcast will be needed.
K2.0010433
Steel C-stand with detachable Turtle Base Max. height 155 cm/61" NOTE To park the MAXIMA QL the Spider (K2.0010425) is needed For all ARTEMIS and TRINITY systems
K2.0010321
artemis Monitor Bracket for the Transvideo 6in Cine HD monitors.
K2.0010322
artemis Monitor Bracket for the Transvideo 8in Cine HD monitors.
K2.0015385
The Multi Support Plate MSP-1 for the TRINITY 2 and Gen.1 allows the use of the TRINITY head as a standalone, handheld, two-axis, fully stabilized gimbal. The MSP-1 include...
K2.0010426
With the CSS Euro mount, the MAXIMA QL equipped with the Spider (K2.0010425) can be attached to dollies and cranes, using the Euro mount. With the CSS Euro mount, the TRINI...
K2.0010427
With the CSS Mitchell mount, the MAXIMA QL equipped with the Spider (K2.0010425) can be attached to dollies and cranes, using the Euro mount. With the CSS Mitchell mount, t...
K2.0010454
Arm post with a diameter of 5/8"/15.8 mm and a length of 3"/76 mm Fits all spring arms and gimbals which are compatible to 5/8"/15.8 mm arm posts
K2.0010453
Arm post with a diameter of 5/8"/15.8 mm and a length of 6"/152.4 mm Fits all spring arms and gimbals which are compatible to 5/8"/15.8 mm arm posts
K2.0010455
Arm post with a diameter of 5/8"/15.8 mm and a length of 10"/254 mm Fits all spring arms and gimbals which are compatible to 5/8"/15.8 mm arm posts
K2.0010456
Arm post with a diameter of 5/8"/15.8 mm and a length of 12"/300 mm Fits all spring arms and gimbals which are compatible to 5/8"/15.8 mm arm posts
K2.0010510
Spare arm post clamp ring Fits any 5/8"/15.8 mm arm post
K2.0010451
Incl. arm posts 5/8"/15.8 mm. Arm post length: 10"/254 mm and 3"/76 mm Fits all spring arms and gimbals which are compatible to 5/8"/15.8 mm arm posts
K2.0010500
Complete spring set made up of two spring sets, one for each arm segment. Capacity: 19 kg/41.8 lb For all ARTEMIS spring arms
K2.0010501
Complete spring set made up of two spring sets, one for each arm segment. Capacity: 23 kg/50.7 lb For all ARTEMIS spring arms
K2.0010502
Complete spring set made up of two spring sets, one for each arm segment. Capacity: 26 kg/57.3 lb For all ARTEMIS spring arms
K2.0037438
Complete spring set made off two spring sets, one for each arm segment. Capacity: 30kg/66.1Ib For all artemis spring arms
K2.0010461
Special tool to open the docking rings and to adjust the friction of the ARTEMIS 1.8" gimbal.
K2.0040046
Post tool for all ARTEMIS and TRINITY systems.
K2.0010434
K2.0010435
K2.0010437
K2.0010436
K2.0037206
![K2.0033662-SU-Stabilizer-Adapter-Mount-SAM-4[4]](/resource/responsive-image/206938/product-overlay/xs/1/k2-0033662-su-stabilizer-adapter-mount-sam-4-4-.jpg)
![K2.0038536-Stabilizer-Plate-For-CBP-450mm-18IN[1]](/resource/responsive-image/233730/product-overlay/xs/2/k2-0038536.jpg)
