Highly adjustable and modular vest. Only extreme comfortable and modern fabrics are used for the artemis vest. Fits any operator with a height from 1.5m up to 2.1m / 4.9ft ...
The artemis carbon spring arms offer a lightweight and optimized state of the art design. The absolutely friction-free ball bearings placed in the extreme stiff and torsion...
8in camera dovetail plate with three rows of holes and slots with an offset of 18mm. AC lightweight support can be mounted on both ends
Docking Bracket for all artemis systems using the 1.8in post and the wide docking ring ø2.5in.
artemis Docking Bracket for artemis systems using the 1.8in post and the small docking ring.
The pivoting yoke upgrade allows the artemis Docking Bracket to lean by 30 degrees sidewise in both directions. So you can use the Docking Bracket as a kind of tilt head wh...
Steel C-Stand with detachable Turtle Base.
artemis Monitor Bracket for the Transvideo 6in Cine HD monitors.
artemis Monitor Bracket for the Transvideo 8in Cine HD monitors.
artemis Monitor Bracket for the Transvideo 6in Cine HD monitors
artemis Monitor Bracket for the Transvideo 8in Cine HD monitors
Universal monitor mounting adapter for flat panel monitors
Bubble for the use with the artemis Universal Monitor Mount K2.0010457
1.5in post clamp to mount the actual artemis monitor bracket and 1. generation artemis monitor bracket onto the 1.5in inner post
1.8in post clamp to mount the actual artemis monitor bracket and 1. generation artemis monitor bracket onto the 1.8in outer post
Additional monitor bracket to mount a second small monitor onto the rods of all actual artemis monitor brackets.
Monitor mounting adapter for Transvideo CineHD 6in, CineHD 8in, RainbowHD and the Starlight monitors
Spacer to adapted the Transvideo Rainbow HD7 SBL to the 6in monitor bracket
Spacers which allows the use of a Small HD 7in monitor with the artemis 6in Monitor Bracket (K2.0010321)
Receiver mount for ARRI, cmotion, Aladin, Fox and Preston focus receivers
Adapter to mount ARRI or cmotion focus receivers at the artemis Focus Bracket
Focus bracket adapter to mount Preston MDR2 or MDR3 focus receivers onto the artemis focus bracket
Modular center post extension to extent the 1.8in artemis center post by 8.5in/216mm. Lemo 3B connectors and internal main cable wiring.
Modular center post extension to extent the 1.8in artemis center post by 8.5in/216mm. Lemo 2B connectors and internal main cable wiring.
Extents the length of the bent gimbal handle by 35mm/1,37in.
Knurled Handle Gimbal Extension adds a second knurled handle to the upper side of the 1.8in artemis Gimbal.
Knurled Handle Gimbal Extension gives more control and a better ...
artemis Gimbal for 1.8in artemis center posts, super low friction, patented self centering mechanism, no-tool gimbal clamp
artemis carbon fibre telescopic centre post, ø1.8in, no-tool clamp, torsion-free guided ø1.5in inner post, fine trim adjustment
artemis Gimbal for 1.5in center posts, super low friction, patented self centering mechanism, no-tool gimbal clamp
artemis telescopic centre post, ø1.5in, outer post carbon - guided aluminum inner post, post clamp using a 4mm 5/32 hex key
Wider arm post fort artemis spring arms and arms using 0.625in / 15.9mm arm posts.
The set consists of two different counterweights: The larger counterweight weighs 300 gr / 0.66 lb, the two smaller counterweights weigh 150 gr / 0.33 lb each.
The small co...
The set includes the counterweight consisting of two half shells
and two Delrin adapters for the 1.8in and the 1.5 in center post.
The Delrin adapters make it possible to ...