Cameras 

ARRIHEAD 2
-the compact geared head smaller, lighter in weight and equally efficient is the formula of the future. The ARRIHEAD 2 is it is successful product. With an equal equipment range and operating convenience, it is 8 cm shorter and approximately 4 kg?s lighter than the large ARRIHEAD. With this design, the ARRIHEAD 2 is an ideal production tripod head not only for 35 mm cameras, but also for 16 mm filming.
Tilt Angle   +/- 30 degrees w/o wedgeplate. +/- 90 degrees with wedgeplate
Wedgeplate increments are 20, 25, 30, 40, 50 and 60 degrees.
Camera Mounting   Sliding base for ARRI quick-release bridgeplate and other touch ?n? go systems.
? 140 mm balance adjustable system. ARRI Bridgeplate System.
Cradle   Tilt Drive via precision drive chain/pulleys, user adjustable tension V-cradle rails, ball bearings.
Tilt/Pan Drive   Tilt Laterally moveable tilt handle up to 38 degrees to right. Selectable 3 Speed gear. Drive, plus neutral.
Tilt Speeds   Slow ? 17.5 turns for 60 degrees full tilt.
Medium ? 9.25 turns for 60 degrees full tilt.
Fast ? 4.75 turns for 60 degrees full tilt.
Pan Speeds   Slow ? 65 turns for full 360 degrees pan
Medium ? 35.5 turns for full 360 degrees pan.
Fast ? 19 turns for full 360 degrees pan.
Lock Off Brakes and Friction Levers   Tilt, two individual positive lock off brakes.
Pan, single positive lock off brake.
Note: Lock and friction levers located near hand wheels.
Gear Head Base   Standard Mitchell.
Miscellaneous   Self illuminating level.
Removeable wheel handle.
2 holding knobs for accessory box.
Viewfinder support bracket.
4 threaded rosettes (2 per side).
Weight   With wedge and quick release bridgeplate 15 kg, 33 Ibs.
Tilt/Pan wheels 2,5 kg, 5,5 Ibs
Temperature Range   - 20C degrees to + 50C degrees
- 4F degrees to + 122F degrees
Max.Load   50 kg, 110 Ibs
Dimensions:  
With Handwheels
  Height 330 mm/13 inch
Length 566 mm/22 inch
Width 343 mm/13 inch
Without Handwheels
  Height 305 mm/12 inch
Length 468 mm/18 inch
Width 267 mm/11 inch
Accessories
  • Battery bracket 2 and special accessory shoe
  • Reduction gear for tilt and pan, ratio 1:5
  • Big handwheels
  • Universal handgrip
  • Adapter 2 for ARRI bridgeplate system
Technical data subject to change without notice