ARRI X CERAMIC 250

The ARRI X Ceramic 250 employs the new Ceramic ST250 HR discharge lamp from Philips, which produces a3200K Tungsten light. It provides almost the same light output as a 1K Halogen lamp, with just a quarter of its power consumption. This results in considerable cost savings and less heat and therefore less discomfort for the model in front of the light.

Ballast and igniter are integrated in the fixture. The light can be directly plugged into the wall. It‘s a wonderful light for creating a smooth and cool background or fill light. If you switch to the black reflector and a clear safety glass you can create sharp shadows.

INTENSIFIER for ARRI X CERAMIC 250

The Ceramic Intensifier is constructed as a flared mirrored box.  This pattern creates additional light output as a result  of multiple reflections.  Utilizing special computer simulation tools, ARRI found just the right scheme to achieve maximum light gain.  Now, a fixture using a 250W Ceramic lamp is comparable to a fixture using a 2000W halogen lamp. An 87.5% power savings! Remarkably, this design matches the light output and light field characteristics of an ARRISOFT 2000. 

The Intensifier is attached to the fixture by simply sliding it in the accessory slot of the ARRI X CERAMIC 250.  Additionally,  popular front diffusion cloth and fabric grids are attached to the Intensifier‘s front lip by Velcro for further light control.