Lightweight

  • Overview
  • Features
  • Models
  • Technical Data
  • Downloads

ARRI equipment is known for the high robustness demanded for film location work, but for run-and-gun applications lightweight ballasts up to 575 W are available with lightweight extruded aluminium housings, an ideal match for the ARRI Pocket PAR lampheads.

    • ALF (Active Line Filter)
    • Line over-voltage protection
    • Protection from overheating
    • Constant lamp power and colour temperature over the lifetime of the lamp
    • Possibility to dim the light between 50 and 100 %
    • Automatic switch-over for 115 V~ and 230 V~ power supplies
    • Active Line Filter - power factor correction
    • Compact and very lightweight aluminium profile housing
    • At least 5 % greater light intensity compared to magnetic ballasts
    • At least 20 % longer bulb life compared to magnetic ballasts
    • Automatic detection of connected luminaire
    • Good service assistance
    • Detailed technical documentation

L2.76013.B EB 125/200, 90-125 V/180-250 V, 200 Hz, Schuko-Plug, ALF, 125 W-connector: Binder, 200 W-connector: Amphenol, aluminium profile housing
L2.76260.0 EB 400/575 VEAM, 90-125 V/180-250 V, 110 Hz, Schuko-Plug, ALF, 400 W-connector: VEAM, 575 W-connector: VEAM, aluminium profile housing
L2.76262.0 EB 400/575 Schaltbau, 90-125 V/180-250 V, 110 Hz, Schuko-Plug, ALF, 400 W-connector: VEAM, 575 W-connector: Schaltbau, aluminium profile housing

Electronic Lightweight Ballasts Versions ARRI Lightweight
EB 125/200
ARRI Lightweight
EB 400/575
ARRI Lightweight
EB 400/575
  Ident-No. L2.76013.B L2.76260.0 L2.76262.0
Mains Supply        
  Line Power 240 VA (max.) 667 VA (max.) 667 VA (max.)
  Supply Voltage 90 bis 130 V~ / 180 bis 250 V~
50/60 Hz 1, N, PE
90 bis 130 V~ / 180 bis 250 V~
50/60 Hz 1, N, PE
90 bis 130 V~ / 180 bis 250 V~
50/60 Hz 1, N, PE
  Nominal Current 2.7-1.8 A / 1.3-1.0 A 7.4-5.1 A / 3.7-2.7 A 7.4-5.1 A / 3.7-2.7 A
  Power Factor cos Φ≈ 0.98 cos Φ≈ 0.98 cos Φ≈ 0.98
Lamp Connection        
  Lamphead connector Binder / Amphenol International (VEAM) Schaltbau
  Lamp Power 125 W / 200 W 400 W / 575 W 400 W / 575 W
  Power Adaption constant control,
automatic detection of lamphead
constant control,
automatic detection of lamphead
constant control,
automatic detection of lamphead
  Current Characteristic square wave,
ca. 200 Hz,
flicker free
square wave,
ca. 110 Hz,
flicker free
square wave,
ca. 110 Hz,
flicker free
  Dimming 70 to 100 % of nominal lamp power 50 to 100 % of nominal lamp power 50 to 100 % of nominal lamp power
  Starting cold start and hot restrike cold start and hot restrike cold start and hot restrike
  Typical Light Ripple typ. < 3% typ. < 3% typ. < 3%
General        
  Dimensions (H x W x L) 130 x• 70 x• 240 mm 155 x• 91 x• 270 mm 155 x• 91 x• 270 mm
  Weight ca. 1.7 kg ca. 3 kg ca. 3 kg
  Protective Rate IP21 IP22 IP22
  Ambient Conditions -20 to +50 °C
10% to 80%
(not condensing)
-20 to +50 °C
10% to 80%
(not condensing)
-20 to +50 °C
10% to 80%
(not condensing)
  Housing aluminium profile housing aluminium profile housing aluminium profile housing
Indicators        
  ON / OFF X X X
  Protective Earth   X X
  Lamp On X X X
  Over Temperature X X X
  Output Mode (Frequency)      
  Remote / DMX      
  Detected Lamp Power      
Features        
  Automatic Lamp Recognition      
  Automatic Lamphead Recognition X X X
  Active Line Filter (ALF) X X X
  Compensation for Cable Loss (CCL)      
  Dimming X X X
Output Type        
  50 Hz (low noise)      
  60 Hz (low noise)      
  75 Hz (flicker free)      
  300 Hz (flicker free High Speed)      
  1000 Hz (flicker free High Speed      
Options        
  DMX      

Manuals
03 Dec 2013 EB 400/575 (L2.76260.0 62.0) - Operating Instructions (German/English)
Download (pdf, 144 KB)
03 Dec 2013 EB 125/200 (L2.76013.A .B) - Operating Instructions (German/English)
Download (pdf, 138 KB)
12 Nov 2013 ARRI Lampheads - General Safety Instructions (English/German)
Download (pdf, 110 KB)