ALEXA SXT Studio
ALEXA SXT Studio Technical Data
|Camera Type||35 format film-style digital camera with an optical viewfinder, a 16:9, 6:5, 4:3 or Open Gate switchable active sensor area, built-in support for the ARRI Wireless Remote System and the cmotion cvolution lens control system, built-in filter holder, Lens Data System, integrated shoulder arch and receptacles for 15 mm lightweight rods|
|Sensor||35 format ALEV III CMOS sensor with Bayer pattern color filter array.|
|Photo Sites||Sensor Mode 16:9
2880 x 1620 used for 16:9 ARRIRAW 2.8K
3168 x 1782 used for 16:9 ARRIRAW 3.2K
2880 x 1620 down sampled to 1920 x 1080 16:9 ProRes HD
2880 x 1620 down sampled to 2048 x 1152 for 16:9 ProRes 2K
3200 x 1800 used for 16:9 ProRes 3.2K
3200 x 1800 up sampled to 3840 x 2160 for 16:9 ProRes 4K UHD
Sensor Mode 6:5
2578 x 2160 used for 6:5 ARRIRAW 2.6K
2560 x 2146 down sampled to 2048 x 858 for 6:5 ProRes 2K Anamorphic
2560 x 2146 re-sampled to 4096 x 1716 for 6:5 ProRes 4K Anamorphic
Sensor Mode 4:3
2880 x 2160 used for 4:3 ARRIRAW 2.8K
2880 x 2160 used for 4:3 ProRes 2.8K
Sensor Mode Open Gate
3424 x 2202 used for Open Gate ARRIRAW 3.4K
3424 x 2202 used for Open Gate ProRes 3.4K
3414 x 2198 up sampled to 4096 x 2636 for Open Gate ProRes 4K Cine
|Operating Modes||Mirror shutter on or off. Switching takes approximately 3 seconds.
16:9, 6:5, 4:3 or Open Gate sensor modes. Switching takes approx. 60 seconds. All sensor modes available in ARRIRAW and ProRes.
|Frame Rates||Mirror shutter off
0.75 - 120 fps
0.75 - 96 fps
0.75 - 96 fps
0.75 - 90 fps
Mirror shutter on
0.75 - 60 fps
0.75 - 60 fps
0.75 - 60 fps
0.75 - 60 fps
All speeds adjustable with 1/1000 fps precision. Some limitations based on recording media or recording format apply.
For a detailed table of frame rates for ALEXA SXT Studio with Mirror Shutter off click here
For a detailed table of frame rates for ALEXA SXT Studio with Mirror Shutter on click here
|Shutter||Rotating mirror shutter: 11.2º - 180.0º. Shutter angle setting precision: 1/10 degree. At some frame rates mirror shutter needs to be less than 180º.
Electronic rolling shutter, 5.0º - 358.0º up to 60 fps; 5.0° to 356° above 60 fps. Shutter angle adjustable with 1/10 degree precision.
|Filters||Permanent filters in front of the sensor: optical low pass, UV, IR. Includes a sealed behind-the-lens motorized filter mechanism that provides an optical flat or ND 1.3 (4.3 stops).|
|Exposure Latitude||14+ stops for all sensitivity settings from EI 160 to EI 3200, as measured with the ARRI Dynamic Range Test Chart (DRTC).
For a graphic of how the exposure latitude shifts at different EIs, click here
|Exposure Index||Values behind the exposure index are the number of stops above and below 18% grey.|
|White Balance||Presets for 3200 (tungsten), 4300 (fluorescent), 5600 (daylight) and 7000 (daylight cool). Automatic calculation or manual white balance for 2000 to 11000 Kelvin, adjustable in 100 K steps|
|Color Correction||While white balance changes the red/blue hue of the image, color correction changes green/magenta. Adjustable range from -12 to +12 CC. 1 CC corresponds to 035 Kodak CC values or 1/8 Rosco values.|
|Sound Level||Under 19 db(A) while recording ProRes 4444 16:9 HD @ 24 fps and ≤ +30° Celsius (≤ +86° Fahrenheit) with lens attached and fan mode set to 'Regular', measured 1 m/3 feet in front of the lens. Silent operation at higher temperatures possible with fan mode set to 'Rec low'.|
|Power In||Three possible inputs: BAT connector, optional battery adapter back or optional battery adapter top. All inputs accept 10.5 to 34 V DC. Approx. 90 W power draw for camera and EVF-1 in typical use recording ProRes at 24 fps to an SxS PRO card at room temperature, without accessories. Initial power draw during power up is higher.|
|Power Out||12 V connector: limited to 12 V, up to 2.2 A. RS, EXT and ETHERNET: input below 24 V is regulated up to 24 V; above 24 V: input voltage = output voltage. RS and EXT connectors combined are limited to 2.2 A. ETHERNET is limited to 1.2 A. Maximum power draw is also limited by the power source.|
|Weight||ALEXA SXT Studio body with PL mount: 8.2 kg/18.1 lbs.
ALEXA SXT Studio body with PL mount, electronic viewfinder, viewfinder cable, viewfinder mounting bracket and handle: 9.8 kg/21.7 lbs.
ALEXA SXT Studio body with PL mount, optical viewfinder and handle: 10.3 kg/22.8 lbs.
|Dimensions||ALEXA SXT Studio body with PL mount: Length: 364 mm/14.33”, width: 189 mm/7.44”, height: 163 mm/6.42”; dimensional drawings available in the ALEXA manual|
|Environmental||-20° C to +45° C (-4° F to +113° F) @ 95% humidity max, non-condensing. Splash and dust proof through sealed electronics. System cooling through radiator/single fan.|
|Lens Mount||54 mm stainless steel LDS PL mount, Super 35 centered. 52.00 mm nominal flange focal depth without FSND filters.|
|Viewfinder||Bright, high contrast optical viewfinder OVF-1 for through-the-lens viewing with low distortion, accurate color fidelity and no delay. Rotates to left and right of camera body and telescopes closer/farther from camera body. Automatically keeps an upright image with an optional manual image rotation. Includes a flip in ND 0.6 contrast filter and de-squeeze optics for 2x anamorphic lenses (1.3x de-squeeze module also available). Includes Basic Insert Module BIM-1 for RGB frame glow. Compatible with 8x and 10x 435 eyepieces, 435 eyepiece extensions and all ARRIFLEX and ARRICAM heated eyecups. With the optional ARRICAM Eyepiece Adapter AEA-1, the OVF-1 can accept the 8x ARRICAM Studio eyepiece or ARRICAM Studio Viewfinder Extension Medium. Not compatible with ARRICAM Studio Anamorphic Extension, ARRICAM Studio Viewfinder Zoom Extension and Lite Universal Eyepiece. ALEXA Studio ground glass and frameglow holder are compatible to the ARRICAM system, but only ALEXA Studio ground glasses and glow masks provide exact alignment of framelines and captured frame.
The OVF-1 can be replaced with the ALEXA Electronic Viewfinder EVF-1 with an Electronic Viewfinder Adapter EVA-1. The EVF-1 is a high quality, low latency (≤1 frame delay) electronic color viewfinder with a 1280 x 784 F-LCOS micro display.
|Assistive Displays||For OVF-1: Warning LEDs for REC (recording), BAT (battery low), FULL (media full).
For EVF-1 and MON OUT: preset and custom frame lines, user rectangles, surround view, 180º image rotation, camera status, false color exposure check, peaking focus check, compare stored image with live image, RETURN IN video and anamorphic de-squeeze. For MON OUT additionally: Reel & clip number.
For a graphic of which false color indicates which exposure level click here
|Control||Camera right: Main user interface with a 3” transflective 400 x 240 pixel LCD color screen, illuminated buttons, button lock and jog wheel. Camera left: Operator interface with illuminated buttons and button lock. Camera acts as a web server, displaying the ALEXA Web Remote on web browsers of computers connected to ETHERNET connector. MIRROR PARK buttons: VIEW/GATE. Optional accessory Remote Control Unit RCU-4 for cabled remote control via camera ETHERNET connector. Optional accessory Wireless Compact Unit WCU-4 for wireless remote control (UMC 3A or UMC-4 required).|
|Recording Codecs||Uncompressed and unencrypted ARRIRAW or compressed and unencrypted QuickTime/ProRes recording. All formats include embedded audio, timecode and metadata.
For more details click here
|Recording Media||SxS PRO or SxS PRO+ cards (requires SxS Adapter 2)
CFast 2.0 cards (requires CFast 2.0 Adapter 2)
XR Capture Drives (requires XR Adapter)
SXR Capture Drives (requires SXR Adapter)
Note: XR Capture Drive Docks require Codex Production Suite to read XR Capture Drives recorded with ALEXA SXT.
|Supported Media||SxS PRO 64 GB (SBP-64A)
SxS PRO+ 64 GB (SBP-64B & SBP-64C)
SxS PRO+ 128 GB (SBP-128B & SBP-128C)
LEXAR 3600x CFast 2.0 cards 256 GB
XR Capture Drives 512 GB
SXR Capture Drives 1 TB
SXR Capture Drives 2 TB
|Monitor Outputs||4x MON OUT BNC connector for uncompressed 1.5 G HD-SDI video: 1920 x 1080 (16:9), 4:2:2 YCbCr; legal range HD video at 23.976, 24, 25, 29.97, or 30 fps. MON OUT 1b is a clone of MON OUT 1a. Embedded audio, time code, metadata and recording flag.|
|Image Processing||16 bit linear internal image processing in full ALEXA Wide Gamut/Log C color space. Target output color spaces: Log C, Rec 709 or Rec 2020. An ARRI Look File (ALF-2) containing the name of the target color space, CDL values and a 3D LUT can be applied to ProRes or MON OUT images and will be saved in metadata. Optional horizontal image mirroring.|
|Synchronization||Master/Slave mode for precision sync of settings, sensor, processing, HD-SDI outputs and ARRIRAW or ProRes recording for 3D applications. PHASE user button for shifting camera phase to move phase artifacts out of frame, i.e. when shooting a CRT monitor or rear screen projector (works in Rec Run TC mode).|
|Playback||Playback of ARRIRAW or ProRes recorded material visible on EVF-1 and MON OUT. Playback audio available over headphone jack and embedded in the MON OUT signal.|
|Audio||1x XLR 5 pin AUDIO IN for 2 channel, line level, balanced audio. 24 bit/48 kHz A/D conversion. Uncompressed PCM audio recording to ARRIRAW, ProRes and embedded in all HD-SDI outputs. Only available with same project/sensor speed at 23.976, 24, 25, 29.97 and 30 fps. Max of 2.5 dBm output from AUDIO OUT headphones connector.|
|Connectors||1x media slot
4x BNC monitoring out HD-SDI, 1.5G MON OUT
1x XLR 5-pin analog audio in AUDIO IN
1x BNC return video in HD-SDI, 1.5G RET/SYNC IN
1x LEMO 16-pin external accessory interface EXT
1x Fischer 2-pin 24 V power in BAT
3x Fischer 3-pin 24 V remote start and accessory power out RS
1x LEMO 2-pin 12 V accessory power out 12 V
1x LEMO 5-pin timecode in/out TC
1x TRS 3.5 mm headphone mini stereo jack AUDIO OUT
1x custom LEMO 16-pin electronic viewfinder EVF
1x custom LEMO 10-pin Ethernet with 24 V power ETHERNET
1x Fischer 5-pin Lens Data Display LDD
2x Fischer 5-pin Lens Control System LCS
1x Fischer 12-pin for CLM-2, CLM-3, CLM-4 or later IRIS
1x Fischer 12-pin for CLM-2, CLM-3, CLM-4 or later FOCUS
1x Fischer 12-pin for CLM-2, CLM-3, CLM-4 or later ZOOM
BNC connectors are designed for fast exchange without camera disassembly. These connectors require a special tool (ALEXA Plus BNC Removal Tool, K5.72915.0).
|SD Card||For importing and storing of ARRI Look Files, camera set up files, frame line files and user pixel masks and custom lens tables for the Lens Data Archive (LDA). Stores frame grabs in ARRIRAW (.ari, 12 bit), TIFF (.tif, 16 bit), DPX (.dpx, 10 bit) or JPEG (.jpg, 8 bit) format. Stores log files. Also used for installing Software Update Packets (SUPs).|
|Upgrades||The Storage Interface Module can be exchanged for future storage modules. The Electronics Interface Module (available as either regular ALEXA or ALEXA Plus versions) can be exchanged for future control electronics. An easily exchangeable lens mount allows other lenses beyond LDS PL mount lenses to be used. Simple camera software updates via free of charge Software Update Packets (SUPs).|
|Software Tools (apps)||ARRIRAW Converter (ARC)
ARRI Color Tool
ARRI Meta Extract
|Software Tools (online)||ALEXA Camera Simulator
Lens Illumination Guide
ARRI Frame Line Composer (AFC)
ARRI Formats & Datarate Calculator
|Note: Technical data based on SXT Software Update Packet SUP 1.0. All data subject to change without notice.|
Aktueller Status >>
Screening Room >>
Camera Showreel Fall 2017
ARRI Forum >>
Screening Room >>
The Looks of ALEXA
Lenses are not the only way to create specific looks. ALEXA is capable of producing an amazing variety of different looks for different stories and situations, with creative on-set color control and incredible flexibility in post.