The ARRILASER bridges the worlds of digital film restoration, analog film projection and long-term archiving. Capable of making recordings with resolutions from PAL up to 6K, the ARRILASER can film-out onto intermediate, camera negative and black-and-white film stocks.
With its capacity to record images onto special separation film stocks, the ARRILASER enables ‘separation mastering’ to preserve feature film and TV production content for future generations, even if it has been shot digitally. Film remains the most proven long-term image storage solution, with modern film stocks capable of surviving 500 years under the right conditions.
Basics of Laser Recording
See which components are needed to turn a digital signal into densites on film.
Three solid state lasers are used in the ARRILASER, as they have a perfect Gaussian beam shape, very high life expectation, minimum size and minimum power consumption.
For each color channel there is one AOM (Acousto Optical Modulator) in place that allows the constant light output of the laser to be modulated according to the color information of each pixel of every digital image. To allow for best possible image quality the modulation is done in 16 bit.
Film Transport and Deflection System
The mechanical deflection system in the ARRILASER is composed of:
- A rotating spindle holding a single
The axle of the spindle runs in a dynamic air bearing and has no contact with stationary parts. An air compressor ensures that the spindle is always running at a constant air pressure.
- An ultra precision linear stage
The only moving part is the stage. An ultra-precision linear induction motor moves the stage through direct magnetic induction without any additional moving parts like gears etc.
- A film stage with pin registration
The ARRILASER film transport system is specially designed for high quality film recording. The pin registration (Bell & Howell standard) used in the ARRILASER generates an excellent steadiness (<20 μm). To transport the film during recording or for winding, there is a sprocket wheel on the stage. This allows switching between 2-, 3- and 4-perf recording without any hardware change.
- Picture Geometry
The linear stage and the deflecting mirror produce perfect straight lines in both directions. Position and size of the image are arbitrarily adjustable. Factory default setting is a tolerance of less than 20 μm.
In the ARRILASER a perfectly shaped laser beam is depicted on the film without any flare.
- Color Landing, Convergence
The three lasers are adjusted to match perfectly on one spot. Thus the color convergence of the whole image is perfectly adjusted.
- Dynamic Range
The ARRILASER achieves 2.046 status M densities and more above base for any available intermediate film stock, without compromise in image quality or recording speed.
New Operating Software
The Trillian Software package offers a new range of possibilites.
ARRILASER Software Interface
The ARRILASER 2 software interface, called Trillian, offers unprecedented flexibility of operation and is itself capable of speeding up daily operations. Trillian's main advantage is its ability to control and operate multiple lasers with the ease of just one application.
A single, centralized job database allows multiple reel recording with just one click and greatly simplifies both job and calibration management. The new job editor allows easier access to recording jobs and also permits greater control of all image processing options.
The existing ARRILASER image processing engine is being replaced by the new ARRILASER 2 Image Booster software that is also used in the ARRISCAN film scanner. The Image Booster utilizes not only the Host PC's CPU (Computer Processing Unit), but also - in line with the latest developments - permits rendering to be carried out entirely with the GPU (Graphics Processing Unit).
A new image viewer with A/B comparison fully visualizes the image manipulation to avoid any unpleasant surprises after a recording has finished.
The status monitor allows everyone involved to have a constant overview of the progress of each individual recorder. There is no need to install any software to access the status monitor as it is simply an HTML broadcast and therefore runs on any internet browser that has access to the company's network.
|HighSpeed Performance||HighSpeed twoK||Speed Performance||Speed twoK||HD/DI|
|Dynamic range||2.046 status M density above Dmin on intermediate film stock|
|MTF||40% @ 40 lp/mm horizontal and vertical|
|Film transport||2000" magazines, supply and take-up separate|
|Shuttle mode||10 frames per second|
|Supported filmstocks||Kodak Vision Color Intermediate Film 5242/2242
Fuji ETERNA-RDI 8511/4511
EASTMAN Fine Grain Duplicating Panchromatic
Negative Film 5234/5366; Separation Material 2238
optional: Kodak Vision 2 100; Kodak Vision 2 50D 5201
Fuji 64D 8522; Fuji ETERNA Vivid 160 8543
|Host computer||Linux Redhat distribution with graphical user interface and machine and job database|
|Network interface||Gigabit Ethernet and Fibre Channel HBA Dual 4GB, others upon request|
|Physical dimensions||size: 115 x 115 x 65 cm
weight: approx. 285 kg
|Electrical requirements||operating voltage: 100-120 V / 200-240 V
power consumption: < 700 W incl. host computer
frequency: 50 Hz / 60 Hz
|Operating environment||room temperature: 19-24° Celsius
rel. humidity: 20-75% non-condensing
|Warranty||12 months all inclusive|
|Laser ratings||Laser product Class 1 according to IEC60825-1 and EN 60825-1:2007
Class 1 Laser product conforms to 21 CFR 1040.10 6 1040.11
|Safety certificates||This product has been tested and found to comply with the limits for a class A ITE device according to: EN-60950-1:2006 Complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007|
Trillian 3D LUT Node
ARRILASER 3D LUT Loader
This enables the ARRILASER Trillian to load any customized 3D LUT in a described format and to utilize the ARRICUBE Creator video-to-film 3D LUTs. The 3D LUT will be applied on-the-fly during the recording process.
Trillian ARRICUBE for Video Look
Universal Color Management for Video to Film
The Trillian ARRICUBE node provides universal 3D LUTs for recording video images onto film and applying them to the images on-the-fly during the recording process. ARRICUBE packages contain 3D LUTs for all negative-print combinations of EK 5242/Fuji 8511 and EK 2383/Fuji CP 3510.
Camera Negative Module
Recording Onto Camera Negative Material
The camera negative option enables the ARRILASER to shoot onto camera negative filmstocks. Supported film stocks are: 5201 Kodak Vision2 50 D;5212 Kodak Vision2 100; 8522 Fuji 64 D; 8543 Fuji ETERNA Vivid 160
Recording 1920 Pixel Per Line
This software plug-in allows recording of native 1920 pixel per line (HD format) across the full aperture or academy area of the film without any rescaling.
Auto Geometry / Pitch Module
Recording any Pixel Number without Rescaling
This software plug-in calculates the pitch based on the image pixel size and the recorded image size. Therefore any number of pixels in a certain range can be recorded without any digital rescaling.
Recording 3-perf Material
This allows the ARRILASER to generate a 3-perf negative with 3-perforation height images.
Recording 2-perf Material
This allows the ARRILASER to generate a 2-perf negative with 2-perforation height images.
Host Computer SAN Kit
Connection to SAN storage
Fiber Channel HBA and additional Network PCI Card to connect the ARRILASER 2 Linux host to a SAN storage.
Screening Room >>
For feature film scanning as well as in a wide range of commercials, film restoration and in digital dailies applications, more than 100 ARRISCANs are in use worldwide. Constant evolution since its introduction in 2004 has made the ARRISCAN the futureproof investment in film digitizing.